Westinghouse Bow Chest WD-10 Cooler ( Capcatcher needed)

[Slapshot42]

Hi,

Brand new to the site looking for a few parts to complete a full restoration on my first machine.

I have a Westinghouse Bow Chest Cooler (WD-10) I'm looking for the cap-catcher that goes on the front. I believe the mount is 10 1/2 inches from post to post for the mounting brackets which are already on the cooler.

Any help or or somebody with one please let me know.

Thanks!

Jared

[Creighton]

Hi Jared,
Welcome to the board! Will watch for your parts.
Good to see another WA. member.
If you have the misfortune of going to Spokane...
Let me know,
Creighton

[Slapshot42]

Creighton,

I have only been to Spokane twice.  There isn't too much there I couldn't live without.

Anyways, thanks for the reply.  What kinda machines do you have, or what are you working on?  I picked up a Vendo -110 during the restoration of the WD-10.  I couldn't pass it up. I got the 110 for $500.00 complete.  It was owned by the same person for 35 years, and before that it was only owned by a old Seattle Fire Dept. in which it was indoors.  It cools, and came with a large door coin mech, keys, etc.

I will probably break this one down this late fall, it should be a good winter project.  The WD-10 is nearly done, just waiting for the last few parts to trickle in so I can start to put it back together.  All the body work is complete, paint, and pinstripe.  Compressor is with Eric and Global.

All for now,

Jared

[koolit]

Jared,
I have a WD-10 cap catcher if your interested. Included is the stainless steel bezel. I want $75 + ship . Let me know.
Erik

[Slapshot42]

Could you send some pics?   Also measure the back of the catcher were the holes are should be 10 1/2 inches.   Very interested.

Jared