SMC Discussion Areas
November 26, 2024, 07:08:38 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Vending Mechanisms (Moderators: johnieG, Jim) > Vendo 44 adapting to the smaller 8 oz. bottle
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Vendo 44 adapting to the smaller 8 oz. bottle  (Read 8236 times)
0 Members and 1 Guest are viewing this topic.
sodaman
25 Cent Member
****
Offline Offline

Posts: 299
« on: May 05, 2010, 06:24:28 pm »
Anyone selling something that allows Vendo 44's to vend the smaller 8 oz. bottle?
Logged
VMC 81:RC, 7UP Pepsi
Jacobs: 26(4), 160, 35, 50, 56 
Quikold RC, Orange Crush, Barqs
General Vending Leader , Master & Midget(THE DALY 32)
American Vendor 124
Guiberson, DP 27 W/stand
VMC 33 7UP, Pepsi 
Mills 45, 47A, 120 W/bottle display
2 Delf Triples VMC 72
70+ soda Venders, 6 Stoner
cdc1960
10 Cent Member
***
Offline Offline

Posts: 162
« Reply #1 on: May 05, 2010, 06:29:22 pm »
the stack that I bought from Funtronics does... you need to play a little with the enclosed vinyl wraps to maybe make them a little thicker to avoid the occasional double vend (i haven't played with it too much yet) other than that, you may want to try wrapping the horizontal bars in the bottom of your existing rack to make them thicker... a piece of automotive heater hose slit down the center may work...

Chris
Logged
Vendo 44, 63
Cornelius SVM48E3, Cornelius Diplomat
AMI D80, G120
Gotlieb Genie
Bennett 956
Eco 240
Theatre Popcorn machine
Watling Horoscope Penny Scale
gum machines, parking meter, taxi meter, pay phone, etc...
it's getting out of hand..
sodaman
25 Cent Member
****
Offline Offline

Posts: 299
« Reply #2 on: May 06, 2010, 08:51:43 am »
How about something for the original rack?
Logged
VMC 81:RC, 7UP Pepsi
Jacobs: 26(4), 160, 35, 50, 56 
Quikold RC, Orange Crush, Barqs
General Vending Leader , Master & Midget(THE DALY 32)
American Vendor 124
Guiberson, DP 27 W/stand
VMC 33 7UP, Pepsi 
Mills 45, 47A, 120 W/bottle display
2 Delf Triples VMC 72
70+ soda Venders, 6 Stoner
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #3 on: May 06, 2010, 09:07:43 am »
Funtronics sells a set of Shims that go on the inside walls of the Rack.. it makes it narrower and allows you to properly vend the newer 8oz bottles.  the shims are just some peices of plexiglass, not sure on the thickness as that is the key element... "Rods secret I'd guess" biggrin
but I'm sure he can advise more.. but it can be done.
Logged
Soda Machine Enthusiast since 1996!
sodaworks
Soda Jerks
*****
Offline Offline

Posts: 3532
« Reply #4 on: May 06, 2010, 01:31:16 pm »
1/8" plexiglass. Cut and line all four sides.
Logged
TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!