Vendo--Model VF100B

[jrsdwilson]

I have a Vendo VF100B. It is a square top, 4-selection(push Button) single chute.
It works fine, but I do need the thermostat temperature control. I plug it in for about 1/2hour and it will stay cool / cold for the rest of the day. Any longer plugged in it will freeze the beer of pop!!!!
Oh ya, with spacers(i made myself) it will dispence cans.
Anyone know or seen one of these before?
Cheers,
John

[Jim]

John,

A few of our sponsors will have a replacement thermostat, check with Fun-Tronics or Soda Jerk Works.
As far as your model, is it similar to the version listed in the Vendo Section of the Soda Machines Listings as the Vendo V-110.

[jrsdwilson]

Jim,
Yup, my VF100B is somewhat the same. Once the service door is open they do (by the picture) look alike.
My VF100B does not have a lighted sign, it was decaled as 7/up then pepsi. It has 4 round selection buttons on the small middle door that will access the coin-mech etc.
It is a marvel to watch it go through the process to dispense. Lots of clicking,whirrrrring then clunk down the chute comes either a bottle or can!!!!!
John