Micsellaneous parts

[collecture]

Dave,
The only box that is close to your measurements is the second from right on the top row.
It is 4 13/16" high in the front and 4 1/4" in back; 4 1/8" wide; 3" deep.
I don't know if it will work for you.

[zosofan]

Quote (collecture @ July 21 2006,10:37)

Here is a snapshot of the misc stuff. Greg - second from left and second row from top looks it might be a ST56 cap catcher if you can get me measurements. Dave - Second from the right -top row has close measurements. I'll email you a better picture.

Hey Tom,

I get ~2.75" between the tangs and up to 10" tall.

Maybe 2nd row 1st or 2nd in from left, or last one in row?

[collecture]

Hi Greg,
I don't have a 56ST cap catcher. The 56ST I had utilized a galvanized metal cap catcher. As I recall, the VMC77 had a cap catcher similar to the second from left on the second row and it also had a tab sticking out for the catcher to sit on. The 56ST cap catcher (pictured below) has two holes on the back side to hang on the two tabs sticking out just below the BO housing (you have the tabs in your picture). Sorry! If I find one, I'll let you know.

[collecture]

I have 7 of the shelves pictured below. Can anyone tell me what machine they belong to?
18" long by 6 1/2" wide with a hook extension.