SMC Discussion Areas
June 28, 2024, 07:13:36 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Electricity use  (Read 2261 times)
0 Members and 1 Guest are viewing this topic.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« on: July 27, 2005, 08:44:19 am »

ok. before i buy the chest cooler Cav. 22 I found, How much electricity does these things pull?

I had my vendo 63, vendorlator 56 and of course my cv 168 running for long stretches of time at once in my garage. Couldnt really tell they used much , I am just wondering what a big machine like the cooler would pull.

Also how hard is it to service?
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: July 27, 2005, 09:05:56 am »

The running current is listed on the ID plate, in general it varies (increases) with compressor size.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #2 on: July 27, 2005, 09:40:04 am »

I think what I'll use it for is mostly family functions and cook outs. Running it off and on some in between uses.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5873


#1 Soda Jerk!


WWW
« Reply #3 on: July 27, 2005, 02:01:23 pm »

Keep this in mind as well...

Just like your refrigerator; if the compartment is left empty, the cooling cycle will increase causing the refrigeration to run more often. When products are in the cooling compartment, they retain the cold longer than air and thus keep the sustained temperature for longer durations which in the end, keeps the compressor from cycling frequently.

With that said, if you plan to operate your machine, my suggestion is to keep it a full as possible during operation so the electric consumption is lower.

Just my thoughts of basic principals...
Logged

My six cents,

Jim

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!