SMC Discussion Areas
November 22, 2024, 11:44:19 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Coin mechanism keeps spitting out nickels - what's wrong  (Read 4412 times)
0 Members and 2 Guests are viewing this topic.
Tandemdad
Newbie
*
Offline Offline

Posts: 14


« on: March 05, 2017, 08:34:18 am »

Recently, my coin machine started spitting out a few extra nickels whenever you'd stick a quarter in the machine. The machine is set to dispense sodas for ten cents. Instead of three nickels, it would toss out five or six. Now, when a quarter is inserted, it empties both sleeves of nickels and keeps running trying to dispense more until I unplug it. When I plug it back in, it seems ok and handles nickels and dimes just fine. But stick another quarter in and it spits nickels until it is unplugged. What's going on and how do I fix this problem? Thanks for your help.

A pic of the coin machine is attached.

Btw: this machine is on an old coke machine, css-8-64.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: March 05, 2017, 01:45:58 pm »

looks like an early version of a coinco 75-9800/A model. could be a bad quarter micro-switch. or a defective CPU circuit board and/or power supply regulator, I used to fix these, now I just replace them.

cheaper in the long run.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!