SMC Discussion Areas
June 16, 2024, 08:49:44 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vending mech  (Read 3364 times)
0 Members and 1 Guest are viewing this topic.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« on: March 17, 2005, 10:11:43 am »

ok I am ready to take apart the vending mech and oil it before putting it back into the Vendorlator 56, looking at the mech, is it supposed to have this much of a gap between the captive links from the spring attached?
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #1 on: March 17, 2005, 10:14:03 am »

would be nice if I loaded a pic.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #2 on: March 17, 2005, 10:15:12 am »

Picture 2
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #3 on: March 17, 2005, 12:03:36 pm »

OK, I went ahead and took everything apart. cleaned and oiled it all.

When I placed it back together it all slid into place and now is from what I can tell ready to go back in the machine.

The gap must have been why it wouldnt vend but only from a couple ports!!!!!??

Live and learn.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #4 on: March 17, 2005, 12:07:59 pm »

Fully assembled.

Thought that would be a scary job removing and oiling the thing.

Actually it was fairly easy. Thank God for digital cameras to take pics before (the way it is) during (as it's taken apart) after (to use as a guide to put it all back together)!!
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
sodaworks
Soda Jerks
*****
Offline Offline

Posts: 3532



« Reply #5 on: March 17, 2005, 12:41:39 pm »

Hello Jasmine64,
  Did your find one of the springs disconnected? Terry
Logged

TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
jasmine64
Soda Jerks
*****
Offline Offline

Posts: 1036



« Reply #6 on: March 17, 2005, 02:15:09 pm »

no just the bar was off center. Pulled everything out and slid them back into place
after cleaning and oiling. I could feel everything click into place.

The springs look like brand new.

had some very old oil build up very tacky and had to scrape out
some of the oil it felt like glue.
Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!