Past Weekend's Pickup - Cavalier 51 and Westinghouse WD-60

[Slider-Bob]

Will do Darrel...

A few other collectors emailed me for some of the same parts you are looking for.

If I do part it out, I will likely email all the collectors interested in it, and ask for their best offer.  I won't open it up to a bidding war, back and forth BS.  Best offer will own it.

I did email another local seller who had another one for sale. I may pick it up if its fairly complete and see what I may need from the one I currently own, and part out the rest.

[collecture]

Slider-Bob, Please let me know if you decide to part out the Westinghouse. I picked up a working 60 this week to sit beside my 102.  I need the following parts: 
The backing piece that holds in the flavor labels
The clear plastic that covers the labels
One of the spacers that goes in the back of the drink rack
Possibly the front door (the previous owner drilled a hole in the front for a free vend switch and I'm not sure if I want it there).
Possibly the coin mech

I just got back home with it and haven't really looked over it in detail, so I might need some more parts.

Thanks,

Darrel

Darrel - I think I have all of the parts you need except the mech.
I will look about tomorrow.

[darrelcraig]

Thanks Collecture.  I'm traveling throughTursday. I'm going to do a thorough assessment next weekend and will post everything I'm missing.

[darrelcraig]

I took another look at my WC-MD-060 and confirmed the parts I need are as I mentioned before:

The backing piece that holds in the flavor labels
The clear plastic that covers the labels
One of the spacers that goes in the back of the drink rack
Possibly the front door (the previous owner drilled a hole in the front for a free vend switch and I'm not sure if I want it there).
Possibly the coin mech

After the trip I made I'm not feeling the energy to try to blind bid on these parts.  Collecture or Slider Bob,  if you find these parts and want to sell them to me, PM me with a price you feel is reasonable and I'll see what I can do.  Thanks again for all the folks on this board who work together to bring these old machines back to life.

Darrel

[collecture]

I took another look at my WC-MD-060 and confirmed the parts I need are as I mentioned before:
The backing piece that holds in the flavor labels
The clear plastic that covers the labels
One of the spacers that goes in the back of the drink rack
Possibly the front door (the previous owner drilled a hole in the front for a free vend switch and I'm not sure if I want it there).

I have:
The backing piece that holds in the flavor labels
The clear plastic that covers the labels
A back spacer from a WB-78, which would work in a pinch with some modification

When you say front door, I assume you are referring to the coin door.
I have a coin door, but it is probably not any better than what you have. It has some vandalism damage along the lock side of the door and one of the locking bar brackets was broken off and is held in place now by a nut/bolt.

I don't want anything for any of it - just pay shipping if you want the bulkier items. If you just want the two flavor label pieces, just PM me your address and I'll mail them to you.
LMK

[darrelcraig]

Thanks Collecture!  PM on its way.  And I'll be sure to pay it forward first chance I get.
Darrel