Need door springs for vendo 126

[Coke Machine Novice]

I need the coil springs for the glass vending door on a Vendo 126.  There are three of them and they are about 3 3/4 inches long with a 7/8 inch tail on each end.  Any ideas where I can find them?

[joesquid]

Try Steve Ebner with Funtronics 301-371-5246.  I've also found most of the springs I've needed at your local hardware store.  I've had luck at the big boys like Lowes and Home depot but, oddly enough, the best selection I've found is at my local ACE Hardware.
Hope this helps!