if you're still needing handle can you post pics of the lids? wanting to see what type you're needing.

Great work as always... I have notice Hammertone paint has dropped a lot of the classic colors.. all I find is silver, copper, bronze colors the blues and greens are gone sucks! wonder if they'll come back?

As aways Jim Top Noch craftsmanship ! Can’t wait to see it back together

Looks great Jim!

Merry Christmas!

  Tim

Hello All,

Just sharing a little progress on my Stoner Candy Vendor...

It should pull air through the evaporator first, then up the back & over the bottles/cans... Basically bottom to top.
 So In your case, yes it's backwards ( wrong rotation) if you are still using the original fan-blade with a reversed rotation motor, it will have poor air circulation, because the reversed blade spin will just "bat" the air around & not really circulate it from the bottom to the top

I have been working on getting the machine all up and running and wanted to ask about the evaporator fan airflow direction.   The set up that came in it blows air down through the round horizontal evaporator with the cold air directed at the bottom of the machine.   I thought it was supposed to draw air up through the evaporator and blow it up to the top of the machine.   Do you all think it has the incorrect motor rotation?

I have 2 of them that work perfect. $350 each, shipped in continental US only.

Email me for pics.

Bobcarlson123@gmail.com

So tried with it going inside the box to see if it would change the compressor running, it did work the way it should, so going to tear into this a little bit and worse case I'll drill a hole into the box just above the compressor area and slide the thermostat tube into there and lay it into the side of the inside of box.
Appreciate the help guys

I agree, sounds like the T-stat's holding tube (mounted to the inside of the tanks wall) may have worked loose & isn't making good contact anymore.