SMC Discussion Areas

Restorations => General => Topic started by: red ranger on July 24, 2002, 01:56:52 pm



Title: Hvlp sprayer
Post by: red ranger on July 24, 2002, 01:56:52 pm
I recently purchased a HVLP sprayer for spraying lacquer on furniture. Has anyone used this for spraying automotive finishes onto coke machines?


Title: Hvlp sprayer
Post by: Jim on July 25, 2002, 03:34:58 pm
This is the only way to spray paint, especially automotive paints.  In some areas, these are the only approved types of sprayers allowed in addition to sray booths.

I would check with people at the paint distributor or sprayer manufaturer to make sure you have the right tip size for the particular paint to be used...


Title: Hvlp sprayer
Post by: red ranger on July 25, 2002, 04:07:01 pm
Jim- thanks for the info. When I was talking to a salesman for Sherwin Williams, he asked me if my HVLP sprayer produced warm air- it does so no moisture enters the paint. He said I can't use this HVLP because it will prematurely harden the paint. Not sure if all brands of paint would have this problem... Any thoughts??? What brand of paints have you used and recommend?


Title: Hvlp sprayer
Post by: Jim on July 25, 2002, 04:16:36 pm
Quote
He said I can't use this HVLP because it will prematurely harden the paint.

I'm not an expert in this area, but I have to disagree with the statement above. I know HVLP spray guns are used everyday to spray automotive paints with excellent results!

If you haven't painted before, I would spend some time practicing before attempting your first machine. My recommendation for paint is PPG products.


Title: Hvlp sprayer
Post by: johnieG on July 25, 2002, 05:38:44 pm
is this HVLP sprayer the kind with it's own turbine unit, or a gun type that uses shop air? (I'm using the gun type)


Title: Hvlp sprayer
Post by: red ranger on July 26, 2002, 08:40:45 am
It has it's own turbine unit...


Title: Hvlp sprayer
Post by: Jim on July 27, 2002, 05:08:27 pm
Well, that takes me out...
I know nothing about the turbine units!
I've only used the regular HVLP spray guns that utilize compressor air.

Sorry... ???