|
Title: Cooler finds of 2019 Post by: Eric on July 06, 2019, 03:46:56 pm What I have gotten this year so far... the Nehi is a keeper the OC is a trader... Getting harder to find...
Both are solid and complete with original cap catchers... I have a correct original OC opener for the OC cooler. Title: Re: Cooler finds of 2019 Post by: Jim on July 06, 2019, 06:25:03 pm Very Nice ! ! !
Thanks for sharing! Title: Re: Cooler finds of 2019 Post by: Creighton on July 06, 2019, 10:21:44 pm Nehi is very clean. Hope the bad repaint falls off the OC with a good spray!
Creighton Title: Re: Cooler finds of 2019 Post by: cohammer on July 06, 2019, 10:32:12 pm Those are 2 great ones , not easy to come by
Title: Re: Cooler finds of 2019 Post by: Rebel on July 19, 2019, 08:28:34 pm Just brought home the other day. Yep, wrong cap catcher. Has rack and cools. Stripping it now.
Title: Re: Cooler finds of 2019 Post by: Slider-Bob on July 20, 2019, 04:21:02 am Hi Rebel. I have the correct ideal cap catcher if you are interested.
Email sent. Title: Re: Cooler finds of 2019 Post by: Rebel on July 21, 2019, 02:50:29 pm Slider Bob...been working on stripping the Ideal and just saw your message. What are you asking for it and by chance any sort of trade possible ?
Title: Re: Cooler finds of 2019 Post by: Slider-Bob on July 21, 2019, 03:25:25 pm PM sent
Title: Re: Cooler finds of 2019 Post by: Rebel on July 24, 2019, 11:07:19 am Bob, are you up for a couple of questions about taking cooling box out of machine to replace insulation and clean up of cooling system.
Title: Re: Cooler finds of 2019 Post by: Slider-Bob on July 24, 2019, 02:45:46 pm I just sell parts. I’m not familiar with the restoration process.
Title: Re: Cooler finds of 2019 Post by: Rebel on July 24, 2019, 03:18:09 pm Thanks Bob.
Title: Re: Cooler finds of 2019 Post by: cohammer on July 24, 2019, 10:37:42 pm I took my RC cooler apart and cleaned up inside and replaced insulation and coil around tank looked fine . Put it all back together and new rubber seals and all complete . Put a vacuum on cooling system and it held great , put the R12 in it and it would never start cooling, just lines frosty. Lesson learned finally figured out the cooling line around tank was slightly blocked with something that did not vacuum out . I would never take one apart again without changing all the coil lines . Just my opinion.
|