SMC Discussion Areas

Trouble-Shooting => Refrigeration => Topic started by: blownmach on January 12, 2019, 03:31:09 pm



Title: choice vend 7 years later...........
Post by: blownmach on January 12, 2019, 03:31:09 pm
Well 7 years later Choice Vend finally stopped cooling.     Im thinking the unit froze up from low freon and now it wont cool at all.  looking for new thermostat, will any brand work that is a contact thermostat?   Had a local refrigerant co. clean and refill the freon 7 years ago so i guess it had a good run, should i remove unit again and have them service or send it to Global Compressors? Thanks For any advice                                                                                                                                                         


Title: Re: choice vend 7 years later...........
Post by: blownmach on January 12, 2019, 08:19:44 pm
I took the thermostat apart and filed the points and adjusted the in/out screws to get the contacts to get the thermostat to cycle in glasses of water 32 to 45 degrees, so see if it works in the machine when i get the Freon filled.


Title: Re: choice vend 7 years later...........
Post by: johnieG on January 12, 2019, 11:21:36 pm
Sounds like you’ve got a handle on it, but you should have your refrigeration guy put some stop-leak with a UV dye to fix your slow leak so you don’t have to keep “ topping it off “ ( which is against EPA regulations)


Title: Re: choice vend 7 years later...........
Post by: blownmach on January 13, 2019, 12:28:42 pm
Thanks for the info JohnieG, we have had this machine since 1987 and 7 years ago was the first time it has ever been worked on, tried loading a pic of the freeing of the coil in the top right corner, put the top shelf back in to circulate the air to see if it helps.