|
Title: AUSTRALIAN Coke Vendo 56 Square-Top Machine replace wiring Post by: kdog on September 02, 2018, 10:54:54 pm Hi,
how does one go about checking the wiring on a Coke Vendo 56 Square-Top Machine. And if it does need to be replaced, how do you do that, where do you get the stuff from etc? cheers Title: Re: AUSTRALIAN Coke Vendo 56 Square-Top Machine replace wiring Post by: Slapshot42 on September 02, 2018, 11:37:19 pm There a few suppliers that have parts that you can purchase.
Check with FunTronics they are on the web. A good starting point is to replace the wiring harness , both motors , and both fan blades. Some may have other ideas , hope they chime in... Title: Re: AUSTRALIAN Coke Vendo 56 Square-Top Machine replace wiring Post by: kdog on September 03, 2018, 03:53:30 am There a few suppliers that have parts that you can purchase. Check with FunTronics they are on the web. A good starting point is to replace the wiring harness , both motors , and both fan blades. Some may have other ideas , hope they chime in... I already have sent an email off to FunTronics. The thing is, since I am in Australia and we use 240V here, would that be an issue? |