SMC Discussion Areas

I had a 3 in1 on a fridge compressor and the inside wires under the cap lid came out while moving it to another place..Would anyone have a pic or diagram of the inside so i can put  the wires back in the correct spot?

Think Funtronics and other vendors sell the same. Maybe ask them. That said it is just AC not much can go wrong.
Creighton

Ok thanks..

Google Searched:

http://youtu.be/RamyqjqeLXA

Google Image

Thanks Slapshot,i do know how to install the 3 n 1..I need to see the inside of the 3 n 1 where the wires connect to the unit..Basically if you pull the wires out of it,while it is not installed on the compressor,what terminals on the inside get what wires?

Not sure the wires are supposed to come out of the 3 to 1.  For what's it's worth a new 3 to 1 may be in your best interest ( they are cheap)

The (2) that plug into the relay should have a spade type connection on the end of the the plug directly into the compressor the other leads are wire tied to get your power.

The video if you watch carefully you might get the info you need ...

Jared

Thanks slapshot..i ordered one today so i can pull the snap lid off where the wires come out of the lid and look at the wiring inside to the capacitor so i can reinstall them in the correct place..

I looked around for the one I had sitting in my toolbox as a spare, but couldn't find it to get you an answer...now I am wondering if I used it on something or if it got some legs and took off?

tkaz thanks for looking..Hope you remember what or if you installed it on..