|
Title: Transitional Coin Mech / small door coin mech - Free Vend Post by: Jonathan816 on January 31, 2015, 11:13:00 am I know free vend is possible, however I'm wondering if there is something that looks a little nicer than this.
(http://i1051.photobucket.com/albums/s438/Jonathan816/COIN%20MECHS/20150131_110742_zpsljfwawld.jpg) (http://s1051.photobucket.com/user/Jonathan816/media/COIN%20MECHS/20150131_110742_zpsljfwawld.jpg.html) (http://i1051.photobucket.com/albums/s438/Jonathan816/COIN%20MECHS/20150131_110723_zps8qbt7bnx.jpg) (http://s1051.photobucket.com/user/Jonathan816/media/COIN%20MECHS/20150131_110723_zps8qbt7bnx.jpg.html) Title: Re: Transitional Coin Mech - Free Vend Post by: MoonDawg on January 31, 2015, 11:44:32 am Good question, this is asked a lot.
Someone will answer you soon............... hopefully accompanied by a picture just like you presented. Title: Re: Transitional Coin Mech - Free Vend Post by: collecture on January 31, 2015, 11:56:25 am Use a 6-32x3/8" screw.
The screw hole on the left lifts the nickel lock lever. The right one lifts the dime lock lever. The screw pushes the bottom of the lever lifting it off the shaft. Title: Re: Transitional Coin Mech - Free Vend Post by: Jonathan816 on January 31, 2015, 12:56:55 pm Use a 6-32x3/8" screw. The screw hole on the left lifts the nickel lock lever. The right one lifts the dime lock lever. The screw pushes the bottom of the lever lifting it off the shaft. Perfect Thanks - worked like a charm Moderators - Can we lock this to the top of the coin mechanisms post? This would be helpful for everyone. Title: Re: Transitional Coin Mech - Free Vend Post by: ZiaDan on January 31, 2015, 11:09:12 pm Thanks for the information!
Title: Re: Transitional Coin Mech - Free Vend Post by: collecture on February 01, 2015, 12:17:49 pm Moderators - Can we lock this to the top of the coin mechanisms post? This would be helpful for everyone. This, obviously, works on all small door mechs also (i.e. VMC-27/33, BV-56, V-39/81/110, C-33/51) Title: Re: Transitional Coin Mech / small door coin mech - Free Vend Post by: Ltransam on June 19, 2015, 02:13:29 pm Toms The MAN!!!!!!!!!!!! :tounge: I Also learned it from Tom |