|
Title: Cavalier 72 or 96 parts Post by: coke_and_stuff on August 27, 2009, 03:49:32 pm Anybody need any 72 or 96 parts?
Ive got these parts that will fit both a 72 and 96 Coin door wiring harness rebuilt cooling unit kick plate and these are for 96 only unless you cut them down Bottle Stack Bottle door I have other parts as well email me with your needs. Joey Title: Re: Cavalier 72 or 96 parts Post by: sodaman on August 28, 2009, 10:58:32 am What price on the Coin door, cooling unit and kickplate? Individual prices. Where are you located? I am in Southern Indiana. You can PM me if you want. Thanks.
Title: Re: Cavalier 72 or 96 parts Post by: sodaman on August 28, 2009, 11:05:15 am I'll try to go out to the barns today and see if I have a coin mech for the Ideal also. It will take me a few hours to go thru all the parts, unfortunately I am not very good at organizing my stuff in neat little piles according to make and model.
Title: Re: Cavalier 72 or 96 parts Post by: coke_and_stuff on August 28, 2009, 12:43:51 pm Sending a PM, I have located a Ideal coin mech.
Joey Title: Re: Cavalier 72 or 96 parts Post by: sodaman on August 29, 2009, 08:23:35 am Joey, I'll take the coin door and the kickplate, the compressor is a great deal but I didn't know it was that new, I'll have to pass on that. Let me know what you will need in the way of shipping charges, PM your address and I'll get a postal money order out to you (I assume you don't want to pay Paypal fees by going that route). Thanks, Harrison.
Title: Re: Cavalier 72 or 96 parts Post by: coke_and_stuff on August 29, 2009, 11:13:02 am Coin door and kickplate are sold!
Joey Title: Re: Cavalier 72 or 96 parts Post by: johnnyfizz on August 29, 2009, 09:28:35 pm I could use the wiring harness.Could you post a pic of a complete one and how much $. Thank's, here's all that's left of one on my machine. :veryangry:
Title: Re: Cavalier 72 or 96 parts Post by: coke_and_stuff on August 29, 2009, 10:51:11 pm Wiring harness is everything behind the coin door and goes and connects to the junction block as you have pictured. It has the light sockets, jones plug etc and is in very good condition. $40.00 shipped email me if you want pics
coke_and_stuff@yahoo.com Joey Title: Re: Cavalier 72 or 96 parts Post by: Shelby1 on October 19, 2012, 09:39:57 pm Good evening,
I'm Looking for a cooling unit for a cavilier 72 machine if you have or come a cross one please let me know. Thanks Mark Title: Re: Cavalier 72 or 96 parts Post by: johnieG on October 19, 2012, 10:32:00 pm Round or square evaporator?
Title: Re: Cavalier 72 or 96 parts Post by: Slapshot42 on October 19, 2012, 11:20:22 pm Round or square evaporator? My thoughts exactly! Title: Re: Cavalier 72 or 96 parts Post by: MoonDawg on October 20, 2012, 07:26:32 am I've never seen a square evaporator in the 72/96.
I am looking for a coin door if anyone has one. Title: Re: Cavalier 72 or 96 parts Post by: Shelby1 on October 31, 2012, 03:19:50 pm Right now it has an after market cooling unit (looks like it was from the 70's) just died and was square. I could use either a square or round cooling unit that works. Of course the round would be very cool but I would be happy with a functioning one. I have the machine all restored and working except for the cooling unit that just went on me.
Thanks for any help one can give me. Mark Title: Re: Cavalier 72 or 96 parts Post by: briandr1 on November 01, 2012, 08:52:17 pm I have a cav 96 cooling unit round evap, compressor needs replaced. Ive found its hard to find working units and when you do at that age they are living on borrowed time. Its best imo to restore you unit to insure it will work for you without any problems.
Title: Re: Cavalier 72 or 96 parts Post by: coke_and_stuff on November 02, 2012, 03:29:48 pm I would rather have a good working original unit than a chinese built compressor unit that alot of the cooling unit guys are using. The originals are bullet proof and will run for ever if taken care off. I have had both over the years and nothing beats an original hands down.
Joey |