|
Title: I need a key (ace style #PAA 2) for a Select Vend machine Post by: cokecolaman on June 02, 2009, 12:41:54 am Where can I find a key for this? I have never drilled this style out and don't know what problems I might create. The machine is a little four selection Pepsi machine. There was no model # tag on it. Any help would be much appreciated.
Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: davethebirdman on June 02, 2009, 03:37:39 am That is the same sort of lock as I had on my U Select.
Had to change it completly because I could get anyone to cut me a key... Dave Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: bubba on June 02, 2009, 05:54:34 am Start with a small bit in the center of the lock and continue with bigger bits... They drill out pretty easy.. The hole will bottom out before you damage any of the linkage behind the cylinder..
Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: Sodak Bob on June 02, 2009, 07:01:10 am Yes, these drill out very easy. I'm pretty sure I have a key for you - I have "lots" of this style key - any numbers or anything on it??? Does anyone know what size it takes?
Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: sodaman on June 02, 2009, 01:29:46 pm Looked, lots of CAV, BT and ABT numbers but no PAA keys. Sorry.
Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: ducatihummer on June 02, 2009, 02:03:54 pm I always see these up on ebay. not sure if they are the same, since they just say PA and not PAA? but it's a complete set of 1-5 and he gives you 6 for free.
http://cgi.ebay.com/Coke-Pepsi-Soda-Machine-Keys-PA1-PA5-most-common-ones_W0QQitemZ140324523588QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item20abfe4e44&_trksid=p3286.c0.m14&_trkparms=65%3A10%7C66%3A2%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50 Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: Sodak Bob on June 02, 2009, 06:35:24 pm I have lots of Cav, ABT XT, and others, but no PAA Hmmmm.
Title: Re: I need a key (ace style #PAA 2) for a Select Vend machine Post by: Basementgeek on June 05, 2009, 03:33:37 pm I have a PAA4,PAA12,PAA16 if any body needs one.
BG |