|
Title: Stoner 180 Post by: Daniel22 on April 22, 2009, 07:07:28 pm After about 2 hours of drilling I finally opened it up. It looks like something is missing. When you put a coin in it the coin just drops straight thru to the coin box. Also, the gum wheel and pull knobs do not work. Any advise?
(http://i120.photobucket.com/albums/o198/trixieone22/nitnendo044.jpg) (http://i120.photobucket.com/albums/o198/trixieone22/nitnendo045.jpg) Title: Re: Stoner 180 Post by: oldskoolcoinop on April 22, 2009, 08:12:32 pm Coin mech looks MIA. It should work on free vend with it out though. Make sure all the shelves, especially the top ones are all the way reset ( up ) or that knob will not pull. Good luck!
Title: Re: Stoner 180 Post by: Eric on April 22, 2009, 09:22:48 pm Have a friend who had 2 mechs for that model... will give him a call and if he still has them I'll have him contact you.....
Title: Re: Stoner 180 Post by: mznb1u on April 22, 2009, 10:42:20 pm Daniel,
There is a way to set that to free-vend. I have the same machine and it does not have a coin mech and it free-vends fine. Unfortunately, I am not exactly sure of how to get it to do that. I am sure if you check with Curtis at Memorylane he can walk you through it. :drinking: Tim :drinking: Title: Re: Stoner 180 Post by: Daniel22 on April 23, 2009, 12:29:10 am Ok, when I reset all the shelves I can pull the knobs but the one under the gum wheel does not pull. This thing looks like it is going to take me forever to restore. Is the a manual on restoring them? If not, one of you guys should make one. I would buy it. Also, is there a book on servicing these machines so maybe that could help me a little.
Title: Re: Stoner 180 Post by: davethebirdman on April 23, 2009, 01:49:08 am Hey Daniel
don't worry my man there are plenty of stoner owners here to get the baby up and working again... Curtis has manuals so I'm sure he will chip in soon... When I got mine the gum wheel was a little sticky by lowering the gum magazines and having a little fiddle it sorted out my problem... If I remove my coin mech it free vends... Nice to have a coni mech though and providing its set up properly it just slips in.... From what I can see it looks pretty clean.... Dave Title: Re: Stoner 180 Post by: mznb1u on April 23, 2009, 06:30:39 am Daniel,
I meant to put in my previous post that there are weights at the botom of the gum/mint columns that spring into position to throw the EMPTY Flag and to prevent the gum/mints from vending if the column is empty. If you tip those out to the loading position and look at the bottom of the column you will see what I am talking about. "If you load them they will vend!" I actually figured that out when I was looking at mine trying to figure out why yours was not working. Don't depsair--now you have a fully functioning non-restored stoner. Clean it up and use it as is until you have the $$$ for the restoration! And Curtis is helpful and can get you the manuals and coin mech if you need them. :drinking: Tim :drinking: Title: Re: Stoner 180 Post by: SIGNGUY on April 23, 2009, 02:43:34 pm Patience will pay off.. play around with it a bit and you'll discover new things... you'll see how it works and it'll all make sense.
Don't get discouraged... If your looking at doing a complete teardown of the mechanism, yes that can be alot of work, but if it's clean enough, I'd just soak it down with degreaser or some engine cleaner, then pressure wash it.. obviously if your looking to do a full restoration like curtis does on his, then your in for a bigger job. if not , take out the mech, get the body work and paint done and clean up the mech, reinstall and vend away! ask questions.. we'll help ya out! Title: Re: Stoner 180 Post by: mrsoda on April 23, 2009, 02:56:14 pm email me you address and i will send you book on the stoner so you dont have to buy jeff wolf
Title: Re: Stoner 180 Post by: Basementgeek on April 27, 2009, 11:57:10 am From what little I know about Stoners there two kinds made, the original Stoner had a mirror and then the Vendo stoner with no mirror and they used the same basic changer, but they used a different mounting way.
BG Title: Re: Stoner 180 Post by: ducatihummer on April 27, 2009, 07:24:37 pm I have an extra mech for your stoner if you need one. Not sure what they go for, but I bought an extra for $50 in case I needed it and I don't. send me a PM if you want it. yours looks like the one that just slides in and dosn't have a screw. If you end up getting one, make sure that's the one you get.
|