|
Title: CoinCo S75 9800 B female connector Post by: 7-upslider on April 08, 2009, 04:15:40 pm Does anyone have or know where I can obtain the female end of the 9 pin jones connector for a CoinCo S75 9800 B?? My Lacrosse machines was pirated before i got it and I've just obtained a new mech, but have nothing to plug the poor thing into.. Any help/advice would be appreciated.
Jonny Title: Re: CoinCo S75 9800 B female connector Post by: bubba on April 09, 2009, 05:32:44 am Mouser Electronics has them...
Title: Re: CoinCo S75 9800 B female connector Post by: 7-upslider on April 13, 2009, 02:00:21 am Thanks bubba... Does anyone know the wiring of the female jones plug...? Which wire goes to which pin and what not... Thanks Title: Re: CoinCo S75 9800 B female connector Post by: johnieG on April 13, 2009, 09:15:42 am Some machines differ slightly, but on a Vendo it's as follows
Pin 1 & 2 = line voltage input (115 volts A.C.) Pin 3 / goes to the vending solinoid Pin 4 / is generally not used. Pin 5 & 6 = correct change only lamp. Pin 7 / goes to ( comes from) the vending microswitch Pin 8 / is generally not used. Title: Re: CoinCo S75 9800 B female connector Post by: 7-upslider on April 13, 2009, 11:23:27 am Thanks Johnnie,
Would that be the same for a Lacrosse would you guess? |