|
Title: v56 bottle door bulb..... Post by: choice120 on February 01, 2009, 09:09:13 am only seems to last a few days then blows. What could be causing this. all wires look good and I am using 4 watt night light bulb. Thanks
Title: Re: v56 bottle door bulb..... Post by: johnieG on February 01, 2009, 09:27:02 am a 4 watt night light (C-7 size) isnt rated for horizontal use & the filiment wont stand up to the vibration caused by the machines compressor ( the filiment will fail as you've found out) go to Lowes or Home depot & get an indicator lamp in an S-6 size /7 to 10 watt size. it has a heavy duty filiment, also if you can get a lamp with a 130-volt rating it will stand up to rough duty service. :darn:
Title: Re: v56 bottle door bulb..... Post by: bubba on February 01, 2009, 09:37:36 am Thats interesting... I been using night light bulbs and they usually last me about a year.
Title: Re: v56 bottle door bulb..... Post by: zadd on February 01, 2009, 09:59:15 am I've found that the Ace hardware brand night light bulbs don't last very long in pop machines . You have to spend a little more and get the name brand and they will last about a year . But I have always use 4w-7w nightlight bulbs with no problem . You might make sure the bulb tip doesn't touch the metal when you snap it back in place . Make sure there's a little space between the boby and the bulb . Its kinda like water dripping on it .
Title: Re: v56 bottle door bulb..... Post by: vintagesodaparts on February 09, 2009, 07:17:05 pm There are 12V and 120V versions of the C base 7W bulbs. If you're buying the 12V version that may be the source of your problem.
|