|
Title: FREE is good but.... Post by: pinballdude on October 05, 2008, 10:59:20 pm Going to pick up a glasco Coke slider. It is complete but is starting to pit pretty bad.
Better to find a new section(end where loading door is) or try auto body friend? Would hate to have to paint over fishtail logo. There may be other bad spots, I haven't really examined it yet. 20 years in a damp basement. Coin mech and racks are there. And what do you use to crank open the loading door? Thanks for advice. Terry Title: Re: FREE is good but.... Post by: collecture on October 05, 2008, 11:02:53 pm And what do you use to crank open the loading door? I use a T-handle hex Title: Re: FREE is good but.... Post by: SIGNGUY on October 06, 2008, 10:01:50 am Free is good... the machine can easily be restored... dont' worry about painting over the logo, I have reproduction vinyl decals you can put on after the new paint job, they are exact to the original in every way.
Title: Re: FREE is good but.... Post by: pinballdude on October 06, 2008, 03:05:22 pm what size hex is needed to open the door?
AND, is there any universal coin box key or will I need to drill the lock? Terry Title: Re: FREE is good but.... Post by: MoonDawg on October 06, 2008, 04:02:59 pm You only need a 3/8" allen wrench to open the loading door and no such luck
on a universal key. Better get out the drill. :darn: Title: Re: FREE is good but.... Post by: loman4ec on October 06, 2008, 07:52:32 pm Funtronics sells a replacement lock for the coin door. SIgnGuy is right that sliders can be restored quite easily and they look great when done. Don't worry about the painted logo. Go with vinyla nd it will look great. Here is a before and after of a glasco I did a while back.
Title: Re: FREE is good but.... Post by: pinballdude on October 06, 2008, 10:48:26 pm Oh man that looks beautiful!!!
Love the small machines. Any instructions you can give a complete amateur? I can do OK cleaning and polishing. Its the body work/paint that I can't do. My first 2 machines from over 20 years ago, I had the local bottler repaint. No bodywrk needed. The Vendolator 33 turned out nice. The Vendo 23 was off on the red. Closer to and orange/red. Their signpainter did the logos. Paid too much for a Victor 4 door, no room for it. Wife found a Beverage-Air for $75 and gave it to me for Xmas a few years ago. Got a 70s Cavalier w wood grain out back and someone wants to get rid of a Westinghouse 10 case master but doesn't want to give a price. I hate that. Sez if he can't sell, he'll haul off for scrap. I wanna offer $25-50 but don't wanna sound cheap. 'sides you shoulds seen wife's scowl when I told her about the free machine. Now when will someone gimme a FREE pinball machine!!! Tery |