|
Title: Will a Vendo 56 compressor/condensor fit into my USS-64?? Post by: Pluto on May 29, 2008, 04:09:33 pm Hey guys,
I'm usually on here reading but not posting. I have acquired a few parts machines over the years and was wondering if the refrigeration system from a vendo 56 would fit into a USS-64 without modification. I know Josh would know. BTW - I am the proud owner of the famous Josh Loman Frosty Root Beet Cavalier CS-64. Its been moved from Florida to Denver and now sits on display in our rec room. . . still a beautiful piece of work! Thanks, Pluto Title: Re: Will a Vendo 56 compressor/condensor fit into my USS-64?? Post by: loman4ec on May 29, 2008, 07:24:18 pm Well welcome to the site!! I don't know if you know but I am now living in Singapore. I moved here about two years ago. The cooling system in a V-56 will not fit in a Cavalier without some major modification. The cooling lines on a v-56 run from the condenser coil to the evaporator coil on the left and the cooling line on a Cavalier run on the right. Also the Evaporator coil on a Vendo is taller than a cavalier so the bottom shelf would not be able to be used. Keep an eye on ebay and you will find a trashed cavalier that you can swap the system from. All of the 64 models have the same cooling system. Good luck. I am happy to hear that you are happy with the frosty machine. That was my favorite machine. I almost didn't let it go.
|