SMC Discussion Areas

 HELLO ALL, DOES ANYONE HAVE PICTURES OF THE SHELVES FOR A HA56E MACHINE?
 DOES IT TAKE CANS AND BOTTLES, OR JUST BOTTLES?

THANKS FOR YOUR HELP     CHUCK

Hello & welcome to the site!

if your machine (vendo I assume ) has a bottle-stack with round holes, then it will only vend bottles, but if it has square-style holes in the stack then it will vend cans. (but not both at the same time)

The HA56E typically is a bottle vender, but the later "Challanger" models did vend 12-ounce cans

It's pretty easy to tell the bottle and can vendors apart when looked at side by side... like JG said... the bottles are round holes and have the typical Vendo style Roller bar on the top that holds the bottles in and only allows one to be vended at a time.. the Can machines have a square tab that you pull out that actuates a "Kicker" on the back side of the stackthat kicks the can out so you can grab the top of it.. see photos...
first round hole bottle stack, second you can see the tabs out of a can stack.

        Here's an interesting combination!

 http://cgi.ebay.com/1950s-Coke-machine-Cavalier-72-Game-room-Corvette_W0QQitemZ290224515795QQihZ019QQcategoryZ13734QQssPageNameZWDVWQQrdZ1QQcmdZViewItem  (http://cgi.ebay.com/1950s-Coke-machine-Cavalier-72-Game-room-Corvette_W0QQitemZ290224515795QQihZ019QQcategoryZ13734QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

thanks for your help it does take cans and does anyone have a set of shevles to fit                     thanks CHUCK

"Old Mill Water"   :biggrin: :biggrin: :biggrin:

I've heard Old Mil-squirtsky called a lot of things but I never heard  Old Mill Water!