SMC Discussion Areas

Vendo 110 slug ejector. How much are they and are they hard to find ?

It shouldn't be that hard to locate but will depend upon small or large door coin mech.

 I probably have what you need Zadd.

Just curous Jim - which, in your opinion, is harder to find?
IMO the small door is.

But the large door can be tricky....
A common Seeburg rejector will not do, although it may appear to work fine. Coins will be directed to the appropriate slots, but you will not be able to scavenge the mech through the 'Coin Return' knob on the machine. There is small rod on the backside of the correct LD rejector's 5/25 wiper blade that allows the LD mech and rejector to be scavenged in one motion.

The LD mech is designed so that - say you put money in and then discover that none of the selections are what you want, then you push the machines coin return knob and your money will be returned - unlike the SD mech.

Thanks guys . I found a v 110 in fair condition missing the ejector. It is the large coin door machine. Guy's asking $550 for it I think that's a little high for it's condition so will see.

I agree, the small door version is a little more difficult to locate...

Is this it?
http://stlouis.craigslist.org/clt/610430437.html

From the pic, it doesn't look too rough...Have you seen it in person? Doesn't look like bad rust!
Value-wise - I don't think you can go wrong.
Parts value (if complete) exceeds $550.
LD mech = $175-$300
Bottle Door = $50
Coin Door = $125-$150
Coin Bezel = $100-$125
Shelves = $100
Bottle stack = $50
Chrome Trim = $50
Stripped machine that cools (has locking door) = $100 (just add shelves and you have a CC refrigerator).

Heck - I'll buy it if you will p/u and part out to me. I'll throw you a bone. I'd want to know a little more about it's true condition though.

yes that's it. I had actually emailed the guy when he had it listed in Topeka. I was going to look into it as well. I had a friend that was going to go see it this week. they guy's wife sent me some pics. the bottle door has some rust, and the springs and guides on the shelfs are missing. Other then that it looked good. I did have a fountain attached to the side at one point. I was going to pick it up just for the main door, and original locks with key (I really wanted those), other then that I only need one shelf. The rest I was going to part to get back what it cost me. If someone picks it up I would go in on it as well. Also, his wife mentioned they have other machines they have collected over the years? If someone wants it to part out I'd love some parts as well. Let me know if anyone wants the pics they sent.

I'd take some parts (equivalent to the total purchase price) - mech with crank, coin door...?
Zadd???

If Zadd doesn't want to pick it up. I may need to go out to Kansas city next week, it's about about an hour or so away from where it's located. I might be able to pick it up and take all the parts off. I'd have to leave the cab though... don't think they'd let me bring it on the plane as carry-on. I'd have to see if I can get a flight out next week, otherwise I'm not going to be out there until the week of April 21st. I didn't get a pic of the coin mech, but they did say it's not a change giver though, but works fine. Anybody else need parts if Zadd or I (if I can swing it next week) picked it up?

The guy sold it last night . I was going to pick it up this weekend. I waited to long missed and out .  :darn: The guy did say he had other machines and would be selling more in the future.