SMC Discussion Areas

Trouble-Shooting => Vending Mechanisms => Topic started by: Pat Pixley on May 27, 2003, 07:12:32 am

Title: The ammo belt in a c51
Post by: Pat Pixley on May 27, 2003, 07:12:32 am

Well I hope Every one had a good weekend. I started to break
down my Cavalier C-51 and need a little help I'm stuck on the ammo belt , It need to come out Do I pull one of the pins
on the belt ? or do I remove one of the rollers ?

Thanks

Pat P.

Title: The ammo belt in a c51
Post by: Jim on May 27, 2003, 09:27:27 am

Pat,

According to the manual, remove the two bottom spindles and then lift the bottle chain off the sprocket and remove from cabinet.

Title: The ammo belt in a c51
Post by: Pat Pixley on May 27, 2003, 03:27:47 pm

Hey thanks Jim, your a life saver.
Now what do you know about a 15 yr old and Drivers Ed ?
(just joking)

By the way what would it cost to get a copy of A Cavalier
C-51 manual.

Thanks

Pat P.

Title: The ammo belt in a c51
Post by: Jim on May 27, 2003, 06:07:07 pm

Well...
With the holiday just passing and me going out of town for a paintball tournament at the end of this week, it might tak me into next week to get the manual converted to PDF so you can download it...
It's pretty basic stuff since the C-51 is a relatively simplistic model.
You may have to bug me a little to encourage me to get it done too!
:unclesam:

Title: The ammo belt in a c51
Post by: Pat Pixley on May 27, 2003, 10:17:10 pm

Hey thank Jim, I do appreciate that alot.

Thanks again
Pat P.

Title: The ammo belt in a c51
Post by: johnieG on May 28, 2003, 06:24:29 pm

Pat, on the C51 I just sold all I did was to remove the cotter pin from the upper right roller & remove it by lifting up on the belt & sliding it out then the belt will "go slack" & remove easily!...johnieG

Title: The ammo belt in a c51
Post by: Pat Pixley on June 04, 2003, 07:13:09 pm

THanks Jim , For the manual I do appreciate that alot and thanks to you Johnie for the info. also .

Thanks

Pat P.