SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: Creighton on February 18, 2008, 08:32:42 pm



Title: Cav. USS-64 main door removal.
Post by: Creighton on February 18, 2008, 08:32:42 pm
Any been there done that tips?
Thanks!
Creighton


Title: Re: Cav. USS-64 main door removal.
Post by: rogerz on February 18, 2008, 09:37:09 pm
Creighton,
It's a piece of cake. I just finished putting one back together.
You have to take the inner panel off to disconnect the light up sign wires.
Undo the coin mech harness. I used 3 different colors of tape on the wires that I had to cut. (blue, pink and black wire)
Then I cut the wire in the middle of the tape so when I went to splice them back I
could easily tell which ones went where. I also took some pics of the wires and made a schematic of which posts of the jones plug they came off. After I had it apart for a year
(not all my fault) those pics came in handy.
Then the nuts on the upper hinge and lift the door out.

Hope this helps
rz


Title: Re: Cav. USS-64 main door removal.
Post by: rogerz on February 18, 2008, 09:51:20 pm
hey look :laugh: that post made me a 25 cent member finally!
 :happydrinkers: