|
Title: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: rhycher on December 13, 2007, 05:11:29 pm I am trying to open the front door panel of my H63C. I thought I need to drill out the lock tumbler and realized I was able to slide it out. When I looked in the hole I saw the back. Not good right?
Could any Vendo 63 owner do something funny and take a picture of the inside door. The small door the lock tumbler is attached too. I want to open the unit and can't because it is locked. I have the 63 manual but it is less than stellar for pointing out how it locks. If I can find a bar I need to knock or can sneak in another way a picture might help me out. The unit I have is in my profile picture. I just can't seem to recall what slid where. Maybe someone knows a quick way in. LOL Title: Re: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: collecture on December 13, 2007, 05:44:55 pm That's a tricky one!
Can you see the lock's cam? Most cams have a square hole for the lock cylinder to go through and it may be stuck in the lock bar - if you can see it, maybe you could stick a flat screwdriver in and turn it. Did you call Fun-Tronics about a key? If the cam is still in position, you might also be able to stick the cylinder back in right through the cam and use the Fun-Tronics key to open it You need to push the lock bar up (I believe). I been able to reach my pinky in and do it without the lock in place. There is a flat piece on the lock bar just above the lock cylinder that you can push on. If you have small children, see if one of them can do it. Maybe some sort of angled piece of metal? Maybe somebody else here has encountered this problem and has an easy solution. Good Luck! Title: Re: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: rhycher on December 13, 2007, 05:53:22 pm I have to whole lock out. When I shine a flashlight in the hole I can see the back. Not a good sign. I will see if I can put a pinky in there and see if there is anything to be reached. Something tells me it is not gonna be an easy fix.
Thanks for the details. Maybe someone will have some pics to go by. LOL Title: Re: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: bubba on December 13, 2007, 06:34:11 pm It depends on The door lock.. You should be able to reach directly inside the hole and towards the right side of the panel. You should be able to feel the bar and the piece that engages the lock cylinder. Lift up on that bar. If its tight, you may want to push or pull on the door panel a bit to loosen it up.
Title: Re: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: SIGNGUY on December 14, 2007, 01:00:33 pm It should just be a bar that slides up and down and you should be able to actuate with a finger..push up or down on it... push on the coin door while doing this to alleviate some pressure that might be on it,, but it should go up or down pretty easily and disengage.
Title: Re: Vendo 63 Owners - Need a favor (some pics) or a hint. Locked door panel Post by: rhycher on December 14, 2007, 01:04:03 pm I just popped it about an hour ago. Thanks guys. I will probably need to replace the outer chrome as well as the lock tumbler but I am finally in.
Thanks everyone for the help. After everyone gave me suggestions I followed through. |