Title: Vendo 44 rejector problems
Post by: joesquid on May 07, 2003, 10:25:11 pm
I've got a Vendo 44 with a rejector issue. I can't get it to work. If I put a dime in, the dime goes to its little holding slot but the crank won't turn. The rejector acts as if I didn't put a coin in at all. I know that's not a whole lot of information to go with but I'm not familiar with these rejectors. Can someone help me out?
Thanks!
Thanks!
Title: Vendo 44 rejector problems
Post by: MoonDawg on May 08, 2003, 08:20:00 am
If the coin comes to rest in it's holding slot, it has already passed through the rejector.
If the handle will not turn, the dispensing unit may be stuck. Open the main door and try the coin mech. again, with it dis-engaged. Glen
If the handle will not turn, the dispensing unit may be stuck. Open the main door and try the coin mech. again, with it dis-engaged. Glen
Title: Vendo 44 rejector problems
Post by: joesquid on May 08, 2003, 12:30:15 pm
Ahh...I knew there was an important piece of information I forgot to add. The unit is not in the machine. Not sure if that makes a difference or not. My problem is that's it's all mechanical....now if it had a few trons running through it..... 