|
Title: Ideal slider problem Post by: Sodak Bob on November 07, 2007, 09:14:58 pm I was hoping to access my Ideal coin mech, and took the screws out of the top (silver)portion. I had no luck, and now i see the screws had nuts on them that fell down into the coin box when i unsrewed them. I then fixed the original problem (dimes hanging up) and now I am at a loss as how to put the nuts back on the screws. (top silver cap is now loose) I turned a small problem into a headache. Any help is much appreciated....
Title: Re: Ideal slider problem Post by: MoonDawg on November 08, 2007, 12:02:59 pm Removing the coin box exposes 2 screws that hold the cover on.
Remove them and lift the whole cover off to service it. |