SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Pre 60's Machines & Coolers => Topic started by: SquareTopCollector on September 20, 2007, 02:28:10 pm



Title: odd roundtop
Post by: SquareTopCollector on September 20, 2007, 02:28:10 pm
it looks like a 110 but that coin door looks odd.

http://sanantonio.craigslist.org/clt/393530589.html


Title: Re: odd roundtop
Post by: MoonDawg on September 20, 2007, 02:50:37 pm
      It's a Vendo 83.......................modified  :upside:


Title: Re: odd roundtop
Post by: johnieG on September 20, 2007, 04:19:53 pm
Yep! it's an SV (SelectaVend) Vendo V83 conversion, looks very complete with exception of the sold-out window on the coin door...they took av old V83, gutted the drum , installed slant shelves & a bottle gate mechanism, plus an external coindoor, wa-la something simular in size & function to a Vendo V-110, the SV company was thinking outside of th ebox on these machines & the smaller V39 conversions too.


Title: Re: odd roundtop
Post by: SIGNGUY on September 20, 2007, 09:56:30 pm
One word... UGLY... Not the the 83 is such a pretty machine to start with... but how does the mech work? don't see any actuator or cords running to the vend mech?


Title: Re: odd roundtop
Post by: SquareTopCollector on September 20, 2007, 10:44:45 pm
very ugly. I dont like how the a in cola rests next to the bottle door


Title: Re: odd roundtop
Post by: johnieG on September 21, 2007, 08:00:22 am
One word... UGLY... Not the the 83 is such a pretty machine to start with... but how does the mech work? don't see any actuator or cords running to the vend mech?

These conversions are electric vendors, you can see the wiring just below the solenoid cover at the bottom of the stack, & the coinmech harness is running along the bottom hinge area of the main door.  ugly, perhaps, but it is a clever bit of recycyling & re-engineering of an otherwise (then) obsolete single flavor vendor into a multi fllavor shelf machine.


Title: Re: odd roundtop
Post by: MoonDawg on September 21, 2007, 09:50:32 am
       I agree, quite a bit of planning went into this project. Just
have to wonder if it could be cost effective?
       The coin door on this Selectavend looks similar to the ones
produced on the old Selectivend 7up and Dr. Pepper machines.
could they be related?
       


Title: Re: odd roundtop
Post by: Ltransam on September 21, 2007, 09:46:55 pm


  Sorta funny  :laugh: I beleive this machine was the same one I saw 4 years ago in San Antonio 4 years ago in an Antique shop for $500 . Ugly & Too much back then


                                                           Leonard