Title: Laugh if you want!!
Post by: audiobeer on January 23, 2002, 11:19:26 pm
I got the 6 case Vendo I was looking for and it works fine with one exception. The dman Lock had tape around it so as not to recess in the door as it's suppose to. This was due to not having a key and the owner warned me. So I removed the lock cylinder and ordered another. In the meanwhile the latch was depressed and is recessed in the door and I can't open it or for the life of me figure out how? I set a new lock and cylinder in but it still won't open? Any tips??
Title: Laugh if you want!!
Post by: Jim on January 24, 2002, 08:58:36 am
Hello,
I had this same siduation some time ago, but I don't remember a dman lock or how it works.
I' looked at a manual but it doesn't give much detail on the locking assembly or any parts suggesting a secondary locking device...?
Do you have a metal dowel that you could put a 75 degree bend in leaving approx. 2" on the end? I'm thinking of inserting the bent dowel into the lock cylinder hole w/ the 2" end pointing down. You'll attenpt to apply pressure upward on the other end of the dowel creating a pivot which will apply pressure on the 2" end hopefully pushing out the handle... I suggest doing this while applying pressure to the whole left side of the cabinet door to relieve pressure on the two latches, top and bottom, so the handle will free up easier...
I got a V-83 open and it was locked shut! You at least have the lock out... But for the life of me, I can't remember what exactly I did to open the box...
I had this same siduation some time ago, but I don't remember a dman lock or how it works.
I' looked at a manual but it doesn't give much detail on the locking assembly or any parts suggesting a secondary locking device...?
Do you have a metal dowel that you could put a 75 degree bend in leaving approx. 2" on the end? I'm thinking of inserting the bent dowel into the lock cylinder hole w/ the 2" end pointing down. You'll attenpt to apply pressure upward on the other end of the dowel creating a pivot which will apply pressure on the 2" end hopefully pushing out the handle... I suggest doing this while applying pressure to the whole left side of the cabinet door to relieve pressure on the two latches, top and bottom, so the handle will free up easier...
I got a V-83 open and it was locked shut! You at least have the lock out... But for the life of me, I can't remember what exactly I did to open the box...
Title: Laugh if you want!!
Post by: audiobeer on February 28, 2002, 10:46:06 pm
Thanks Jim! It worked!
Title: Laugh if you want!!
Post by: audiobeer on March 11, 2002, 10:38:46 pm
I'm on my third replacement lock for the SOB!!! If I would have known I would have these problems would have had a locksmith out here.