|
Title: Vendo 56 parts needed Post by: chicojerry on August 04, 2007, 10:37:50 am I have a Vendo 56 and need the following parts: 1)the connecting bar on back of the door that runs between the coin mech and vend shaft; 2) the vending cam cyliner and mounting bracket below the bottle rack (this is the part that the vend shaft on the door fits into when it closes); 3) vend handle; and 4) coin mechanism with slug rejector.
Please let me know if anyone has any of these or suggestions as to where I might look. Thanks Jerry Title: Re: Vendo 56 parts needed Post by: MoonDawg on August 04, 2007, 10:57:27 am We assume you got one of those round corner 56 machines that got converted to an electric version in the early 60's. If you try and buy all of those parts separately you will wait a long time and pay way too much!
You need to find a transitional 56, that is a 56 that was built with square corners but has all the precious parts you need. Follow this site for a few weeks......they show up more often than the parts individually! Title: Re: Vendo 56 parts needed Post by: chicojerry on August 04, 2007, 11:12:57 am Hi Glen- Yes, I have the round corner Vendo 56 that someone converted to an electric version. I want to restore it to the original manual version.
Thanks Jerry Title: Re: Vendo 56 parts needed Post by: coke_and_stuff on August 04, 2007, 08:12:15 pm I have a complete 56 mechanical bottle stack. $75.00 plus shipping.
Joey |