Title: Vendo V23 spintop
Post by: johnieG on July 20, 2007, 10:52:21 am
So I was sub-contracted to restore a Vendo V23/spintop for a local gameroom customer who sold the machine to Coca-Cola of Detroit , Coke is going to be presenting the machine to some other corporate big-wig who is retiring soon, I never had so much trouble locating parts for such a simple little machine!
It seems that the inside bottle holder/ honeycomb drum and the coin mech assy. are hard items to come by, but thanks to some local SMC board contacts we managed to locate the elusive parts just in time!
( thanks to Randy & Ron!) here are some quick pics of the machine before it headed out the door to the sign-painters for lettering.
the only question I have is the coinmech came without a 10-cent slug rejector, so which model fit's this puppy? I was told that it's the same as a Jacobs 26, but it looks to be about the same dimentions as a Glasco rejector, the Ideal rejector is too short & puts the accepted dime out of the wrong (right-hand side) of the mech..anybody know?
PS be warned! that removal & reinstallation of the bottle drum is a real pain in the A$$ as the refrigeration lines are physically attached to the inside drum with aluminum brackets that are spot-welded to the skin of the drum ( a whole lot of drilling them out!)
It seems that the inside bottle holder/ honeycomb drum and the coin mech assy. are hard items to come by, but thanks to some local SMC board contacts we managed to locate the elusive parts just in time!
( thanks to Randy & Ron!) here are some quick pics of the machine before it headed out the door to the sign-painters for lettering.
the only question I have is the coinmech came without a 10-cent slug rejector, so which model fit's this puppy? I was told that it's the same as a Jacobs 26, but it looks to be about the same dimentions as a Glasco rejector, the Ideal rejector is too short & puts the accepted dime out of the wrong (right-hand side) of the mech..anybody know?
PS be warned! that removal & reinstallation of the bottle drum is a real pain in the A$$ as the refrigeration lines are physically attached to the inside drum with aluminum brackets that are spot-welded to the skin of the drum ( a whole lot of drilling them out!)
Title: Vendo V23 spintop
Post by: johnieG on July 20, 2007, 10:53:25 am
more pics
Title: Vendo V23 spintop
Post by: davethebirdman on July 20, 2007, 02:44:06 pm
Nice machine.... Nice Job...
Title: Vendo V23 spintop
Post by: SIGNGUY on July 20, 2007, 02:58:08 pm
Nice looking Restoration... but let me get this straight... Coke is presenting a Machine to a retiring Big WIg Exec ad they chose a Vendo 23
?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?
?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?Title: Vendo V23 spintop
Post by: davethebirdman on July 20, 2007, 03:04:24 pm
You know. I really like those 23's. I had the chance to buy one once. Had sat in a barn in UK for 20yrs and probably in a barn in the US for 20 yrs before that. The seller wanted $2000 so I said "no thanks".
I need a break... Something has gotta show up soon. Plse..
I need a break... Something has gotta show up soon. Plse..
Title: Vendo V23 spintop
Post by: MoonDawg on July 20, 2007, 03:57:23 pm
(SIGNGUY @ Jul. 20 2007,12:58)
QUOTE
Nice looking Restoration... but let me get this straight... Coke is presenting a Machine to a retiring Big WIg Exec ad they chose a Vendo 23?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?
?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?Or at least find a complete 23 for restoration.
Title: Vendo V23 spintop
Post by: Kilroy on July 20, 2007, 04:55:43 pm
(SIGNGUY @ Jul. 20 2007,3:58)
QUOTE
Nice looking Restoration... but let me get this straight... Coke is presenting a Machine to a retiring Big WIg Exec ad they chose a Vendo 23?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?
?? Comon..... Couldn't they fork out the few extra dollars for a nice 81?Maybe he's the guy who thought "New Coke" was a great idea
Title: Vendo V23 spintop
Post by: Ltransam on July 20, 2007, 06:01:36 pm
Hello, JohnieG
Heres A Couple of picture of the Coin Mech in the top of a V-23 Lid I have . It's also a Cent 10 Mech . I hope this Helps
Ltransam
Heres A Couple of picture of the Coin Mech in the top of a V-23 Lid I have . It's also a Cent 10 Mech . I hope this Helps
Ltransam
Title: Vendo V23 spintop
Post by: Eric on July 20, 2007, 09:25:19 pm
Ha! If this guy thought up NEW COKE doubt he'd be retiring..
Maybe that's how long he's been with the company 23 years?.....
23's aint bad I had a couple and hauled a couple (scary story there...
one of them FLEW out the back of my truck onto the
highway I was sick! But a couple years later Randy from Ozark had restored to new Now that was a restoration! WOW....
Maybe that's how long he's been with the company 23 years?.....
23's aint bad I had a couple and hauled a couple (scary story there...
one of them FLEW out the back of my truck onto the
highway I was sick! But a couple years later Randy from Ozark had restored to new Now that was a restoration! WOW....
Title: Vendo V23 spintop
Post by: MoonDawg on July 21, 2007, 11:39:57 am
(johnieG @ Jul. 20 2007,8:52)
QUOTE
I was told that it's the same as a Jacobs 26, but it looks to be about the same dimentions as a Glasco rejector,
Yes, the Jacobs is the same as the Glasco which is
also the same as the V-39 and small door 81 and 110 and VMC 27 and 33 and 72 and Selectivends & more.
What Leonard has is really a 5 cent mech, it's the same body as the others but lacking the 10 cent sorting mechanism on the back.
I have a 5 cent stainless steel Canadian rejector that should work if you need one.
Title: Vendo V23 spintop
Post by: johnieG on July 21, 2007, 02:25:47 pm
Thanks! that'll help. I've got a glasco 10-cent rejector.. 
Title: Vendo V23 spintop
Post by: Ltransam on July 21, 2007, 09:25:02 pm
Hello,Glen
I have a Question I don't know much abought Machines execpt I Like em .I don't restore them And I really DON'T do ay Electrial work .
But HOW do you tell that the coin meck I pictured for the V-23 is a Nickel
Because I can't get a Nickel to even go down it .Plus the slot at the bottom will only accept a Dime . And a Dime works Perfect every time .From top to Bottom .
Again I really DON'T know anthing abought Coin Mech .
Is there Manuals that Show how they Work ? And Which is for a Nickel & Dime & So on ?? I had JohnieG do one for my C-55E-2 Last year .But That did'nt fix My Problem with the machine . The Quarter's & Dime's & Nickel's still fall threw & the switch to push to vend Bottle dose nothing . The ONLY way I can Make the Motor vent is to Manualy trip the Coil in the Housing on the inside that has 3 coils enclosed in it .
Again I just Buy em. As long as the Cooling System works I'm Happy
I have a Question
I don't know much abought Machines execpt I Like em .I don't restore them And I really DON'T do ay Electrial work . But HOW do you tell that the coin meck I pictured for the V-23 is a Nickel
Because I can't get a Nickel to even go down it .Plus the slot at the bottom will only accept a Dime . And a Dime works Perfect every time .From top to Bottom .
Again I really DON'T know anthing abought Coin Mech .
Is there Manuals that Show how they Work ? And Which is for a Nickel & Dime & So on ?? I had JohnieG do one for my C-55E-2 Last year .But That did'nt fix My Problem with the machine . The Quarter's & Dime's & Nickel's still fall threw & the switch to push to vend Bottle dose nothing . The ONLY way I can Make the Motor vent is to Manualy trip the Coil in the Housing on the inside that has 3 coils enclosed in it .
Again I just Buy em. As long as the Cooling System works I'm Happy
Title: Vendo V23 spintop
Post by: collecture on July 21, 2007, 09:45:49 pm
Leonard,
You have a dime rejector, but it is an odd and HTF rejector.
I ended up using a nickel rejector on mine and filing down the slots on the coin plate to accept a nickel.
The problem is that the coin MUST exit the rejector on the front and most dime rejectors exit on the back.
I have not figured out why there are soooo many V23's out there, yet nobody parts them out.
You have a dime rejector, but it is an odd and HTF rejector.
I ended up using a nickel rejector on mine and filing down the slots on the coin plate to accept a nickel.
The problem is that the coin MUST exit the rejector on the front and most dime rejectors exit on the back.
I have not figured out why there are soooo many V23's out there, yet nobody parts them out.