Title: squar top vendo
Post by: tim on June 24, 2007, 07:23:53 pm
I finly got my matchiene to vend.Its a vendo220/125 if i load cans theres no problem . But when i load botels (water and beer ) it goes through 2 cycles that wont vend then 2 cycles that will and so on.Can somewon help to solve this problem.
Title: squar top vendo
Post by: johnieG on June 24, 2007, 09:03:13 pm
Yo have to adjust the vending motors control disk, normally there are four-notches visable for double-depth can vending, you need to loosen the screw & rotate the white disk so that only two notches are visable, (then snug up the screw, but not too tight, or you'll strip the threads out of the red disk)
Title: squar top vendo
Post by: tim on June 25, 2007, 09:37:22 pm
thanks for the help .its my first machine so i dont have a lot of knowhow but once again thanks.