Title: Vendo 80C (with stainless)
Post by: collecture on June 05, 2007, 08:42:01 am
eBay item # 330130113148
Not a bad price if you want one and a BIN.
You'll see twenty V-80's without stainless for every one with stainless.
Seller says the vend motor doesn't work, but I am pretty sure Fun-Tronics sells them.
Not a bad price if you want one and a BIN.
You'll see twenty V-80's without stainless for every one with stainless.
Seller says the vend motor doesn't work, but I am pretty sure Fun-Tronics sells them.
Title: Vendo 80C (with stainless)
Post by: MoonDawg on June 05, 2007, 09:24:36 am
That's an excellent can machine. Why buy a square corner
machine when this is priced so low?
I am sitting on one exactly the same, and advise anyone to
jump on this one. (Grainger sells the motor also).
machine when this is priced so low?
I am sitting on one exactly the same, and advise anyone to
jump on this one. (Grainger sells the motor also).
Title: Vendo 80C (with stainless)
Post by: halehouse on June 05, 2007, 03:18:04 pm
Yeah, that isn't far.
These are in the same "town" as me. The 39 is missing the drum too, but the select-o-matic doesn't look bad. Machines in Manassas
These are in the same "town" as me. The 39 is missing the drum too, but the select-o-matic doesn't look bad. Machines in Manassas
Title: Vendo 80C (with stainless)
Post by: halehouse on June 05, 2007, 03:20:13 pm
Title: Vendo 80C (with stainless)
Post by: Bob K on June 05, 2007, 04:55:07 pm
Dan - jump on that select-o-matic!
Title: Vendo 80C (with stainless)
Post by: Gumbo on June 05, 2007, 07:43:22 pm
Dan-it's all you. Don't let that deal pass by and so close to us. I promised the wife I would not buy anything until I get her kitchen back together. I am dept in a kitchen remodeling. 
Title: Vendo 80C (with stainless)
Post by: bubba on June 05, 2007, 09:15:49 pm
(Gumbo @ Jun. 05 2007,8:43)
QUOTE
Dan-it's all you. Don't let that deal pass by and so close to us. I promised the wife I would not buy anything until I get her kitchen back together. I am dept in a kitchen remodeling.
I hear ya bud... I myself am just about finished with my promise project. I have about another good 2 days to finish all the little stuff, and just can't seem to get the time to finish. I just brought my juke in the house to hope increase my motivation. I am not allowed to touch it until the room is done.
Title: Vendo 80C (with stainless)
Post by: Eric on June 06, 2007, 07:33:10 am
You could part the 39 out and pay for all of them... if the drum is inside.
the drum would bring close to $300 itself.... You should at least go check them out...
the drum would bring close to $300 itself.... You should at least go check them out...
Title: Vendo 80C (with stainless)
Post by: SIGNGUY on June 06, 2007, 08:42:15 am
(Gumbo @ Jun. 05 2007,8:43)
QUOTE
I promised the wife I would not buy anything until I get her kitchen back together. I am dept in a kitchen remodeling.
It must be the year for Kitchen Remodels... I too am just finishing up the Kitchen, New Cabinets,counter, Sink,electrical upgrade, lights, General makeover... Can't wait to be DONE!!!
Title: Vendo 80C (with stainless)
Post by: SquareTopCollector on June 07, 2007, 11:39:09 am
If all goes as planned I will have this machine in the non stainless for 100 bucks
Title: Vendo 80C (with stainless)
Post by: Eric on June 07, 2007, 12:34:29 pm
$100!!! Sweet score! good Luck!
Title: Vendo 80C (with stainless)
Post by: SquareTopCollector on June 07, 2007, 12:46:28 pm
yep, first round top and a nice model too. I dont want to jinx it. It needs compressor work but I can get that fixed. I have a guy who paints motorcycles so I will have it repainted as well.
Vendo 80's is a can only machine right?
Vendo 80's is a can only machine right?
Title: Vendo 80C (with stainless)
Post by: collecture on June 07, 2007, 01:31:56 pm
QUOTE
Vendo 80's is a can only machine right?
No, it originally vended the 6 1/2 oz. Coke bottles and still will with no modifications.
OR
You can shim up the sides and have it vend the 8 oz. Cokes that you can get today.
OR
As Moondawg said, it can be modified to vend cans also.
Title: Vendo 80C (with stainless)
Post by: SquareTopCollector on June 07, 2007, 01:39:45 pm
where are the instructions to make it vend cans?
I dont drink soda so this will be useless unless it can vend cans or water bottles.
thanks
I dont drink soda so this will be useless unless it can vend cans or water bottles.
thanks
Title: Vendo 80C (with stainless)
Post by: SIGNGUY on June 08, 2007, 08:39:18 am
(SquareTopCollector @ Jun. 07 2007,2:39)
QUOTE
I dont drink soda so this will be useless unless it can vend cans or water bottles.
thanks
thanks
You collect Soda Vending Machines and Don't drink Soda? What got you into this hobby?
Just curious...
Title: Vendo 80C (with stainless)
Post by: collecture on June 08, 2007, 11:36:43 am
Seller lowered it to a $425 BIN
Somebody should grab this machine.
The cabinet is the same as a V81 and coin entry bezel will work for an 81D.
You could sell the V80 parts and have a cheap cabinet - 81 parts do pop up now and then.
I'd be interested in a couple of the SS trim pieces.
I would guess that you could get an 81D pieced together for about $1000 or less.
Somebody should grab this machine.
The cabinet is the same as a V81 and coin entry bezel will work for an 81D.
You could sell the V80 parts and have a cheap cabinet - 81 parts do pop up now and then.
I'd be interested in a couple of the SS trim pieces.
I would guess that you could get an 81D pieced together for about $1000 or less.
Title: Vendo 80C (with stainless)
Post by: SquareTopCollector on June 08, 2007, 02:03:35 pm
(SIGNGUY @ Jun. 08 2007,9:39)
QUOTE
(SquareTopCollector @ Jun. 07 2007,2:39)
QUOTE
I dont drink soda so this will be useless unless it can vend cans or water bottles.
thanks
thanks
You collect Soda Vending Machines and Don't drink Soda? What got you into this hobby?
Just curious...
I like to repair things, plus they keep beer very cold
Title: Vendo 80C (with stainless)
Post by: halehouse on June 08, 2007, 04:00:55 pm
Wow, and not far away. I just don't have space to take on more machines.
Title: Vendo 80C (with stainless)
Post by: sodaworks on June 09, 2007, 07:32:38 am
Shh... Don't tell anyone but I don't drink soda's anymore either. I quit about 5-6 years ago. Lost about fifteen pounds in the first month after quiting them.
Title: Vendo 80C (with stainless)
Post by: Eric on June 10, 2007, 09:53:05 am
Ha! I haven't had a soda in 8 months... lost a few punds....
It must be my pizza intake that's keeping the weight on...
It must be my pizza intake that's keeping the weight on...
Title: Vendo 80C (with stainless)
Post by: bubba on June 10, 2007, 08:20:00 pm
The only soda I drink is Boylans'. It is made with cane sugar and is available at one of the local grocery stores... for some reason, they don't carry the cola, but the orange cream is out of this world!
Title: Vendo 80C (with stainless)
Post by: SquareTopCollector on June 10, 2007, 09:00:07 pm
I love diet coke but having 5 a day was giving me a second chin. I drink Jones soda from time to time, its a cane sugar soda also and their black cherry flavor is hard to beat. I wish Faygo was sold in Fla, they have the best grape soda.
Title: Vendo 80C (with stainless)
Post by: SIGNGUY on June 11, 2007, 08:58:22 am
Yeah, I should cut down too... 3-4 Dt cokes a day is probably why I can't fit into that Speedo!!
Sorry no photos!!!
Sorry no photos!!!