|
Title: Vendo 39 bottle drum Post by: USMC Vet on May 23, 2007, 03:57:18 pm I have a bottle drum for a Vendo 39. I have had some people email me wanting to know the dimensions,etc; This one guy said he had a drum for a 39 with 3 rings. Mine has 4 rings. Could someone tell me the difference. Only thing I could think of was the 4 ring will vend or hold the 12oz. bottles. The dimensions on mine are 7 " from the back where the bottle rests to the front edge of the drum. The diameter of the holes where the bottle goes is just shy of 2 1/2" . Thanks ! Tony
Title: Vendo 39 bottle drum Post by: davethebirdman on May 23, 2007, 04:16:53 pm I have just had a look at my drum. It has two rings and the back plate. Are you sure that the legth inside is only 7" mine is nearer 7.5 to the back plate. My hole is also just shy of 2.5" wide. Its the original type and won't vend the larger bottles.
Dave Title: Vendo 39 bottle drum Post by: davethebirdman on May 23, 2007, 04:22:34 pm I've just had a look at a 39 I sold last year. That had three rings and the back plate. It was the same size drum.
First picture drum now gone. Saecond picture Drum in current machine. Title: Vendo 39 bottle drum Post by: MoonDawg on May 23, 2007, 04:26:30 pm Dave has the early 39 drum.....Tony has the late model drum.
The rear plate that holds the counterweight and has notches around the perimeter for indexing, has been reversed in the later model allowing extra length for longer bottles. Title: Vendo 39 bottle drum Post by: USMC Vet on May 23, 2007, 04:40:32 pm Thanks for the info Dave and Glen, super fast replies. Now I know what I have . Thanks!
Title: Vendo 39 bottle drum Post by: collecture on May 23, 2007, 07:14:47 pm Yes, you have a late model drum.
It will hold longnecks, etc; however, the 12 oz. Cokes do not fit (too large in diameter). It was made for the King Size (10oz.) bottles (crown first) and the 6 1/2oz. bottles (butt first). Title: Vendo 39 bottle drum Post by: USMC Vet on May 24, 2007, 10:07:35 am I tried putting a Miller Lite longneck in the drum and it would not fit, just a tad too big in diameter. Has anyone actually seen a longneck being vended from a 39 ? I know Cornhusker sign makes a repop drum. But I was wondering if anyone has ever used longnecks in an original drum. Thanks ! Tony
Title: Vendo 39 bottle drum Post by: sodaworks on May 24, 2007, 11:43:22 am Try a coors light longneck, I heard it will fit.
Title: Vendo 39 bottle drum Post by: collecture on May 24, 2007, 03:00:03 pm Cornhusker's repop drum was modeled after the later style.
I don't think they are much different. Are you sticking the Miller Light in crown first? The holes in the back plate of the drum are smaller than the butt of the 6 1/2 oz. Coke bottles, so they can keep the crown reachable when vended. You are supposed to grab the bottom of the larger size bottles. I can't believe that it is larger in diameter than a 10 oz. Coke bottle. |