Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:30:58 pm
Well my buddy who is into gameroom equipment is finally getting ready to have a "barn" sale of all of his accumilated soda machines, he let me have a "sneak peek" & I scored a sweet Nesbitts Vendo/transitional V126! and a Vendo V77 Coke that is extra clean! he plans to list all these machines & more in the Coin-op & slot magazines with full page ads, so Pat Pixley & my self are planing to hit his stash next weekend Sunday the 14th of Jan.
He's getting away from the soda machines ( "too many irons in the fire" ) & concentrating on his game room line of Pinball, Slots, Pool tables, etc. so if you see something you might like notify me & I'll out a "sold Tag" & get you his asking price(s) & you can give him your best offer, the machines I'm showing all look to be complete, & were funtional at one point in time ( these are his "runners" as he said to me) & he has many nore parts machines that aren't shown in a sepparate barn.
So I'd thought I'd give the site members a Heads-up on this little Jack pot..
He's getting away from the soda machines ( "too many irons in the fire" ) & concentrating on his game room line of Pinball, Slots, Pool tables, etc. so if you see something you might like notify me & I'll out a "sold Tag" & get you his asking price(s) & you can give him your best offer, the machines I'm showing all look to be complete, & were funtional at one point in time ( these are his "runners" as he said to me) & he has many nore parts machines that aren't shown in a sepparate barn.
So I'd thought I'd give the site members a Heads-up on this little Jack pot..
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:33:26 pm
The V77
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:35:52 pm
Now The "Stash"
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:38:43 pm
More
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:41:37 pm
This Cavalier CS122 needs a Home!
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 06:52:03 pm
He has Ideal 55's in embossed 7up, generics, an Ideal 85/Hires rootbeer/embossed, Atlas Beverages. a GE waterchilled, Chest like the one I'm restoring. lots of chest coolers & various sliders, and as you can see quite a few 'fridges for the 40's & 50's Even a LaCrosse shorty 56/Vernors with the little bottledoor! & a real nice LaCrosse 7up/lightup/90, & a lot of Westinghouse standard chest coolers a mix of electric & ice chilled & a few Cavlier Chests/giants & a statndard water-chilled
I'm going back tomorrow to help him sort them out & arrange them for the sale ( basically digging them all out from the pile!)...so drop a line/email or PM me...
Or come join use & make a day out of it!
I can assist with shipping or storage until you can pick you machine up.
I'm going back tomorrow to help him sort them out & arrange them for the sale ( basically digging them all out from the pile!)...so drop a line/email or PM me...
Or come join use & make a day out of it!
I can assist with shipping or storage until you can pick you machine up.
Title: Jack Pot!
Post by: johnieG on January 06, 2007, 07:24:22 pm
bump
Title: Jack Pot!
Post by: dr galaga on January 06, 2007, 08:14:53 pm
(johnieG @ Jan. 06 2007,5:41)
QUOTE
This Cavalier CS122 needs a Home!
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
Actually, I see a Space Invaders peeking out!
Is he getting rid of video games too?
Title: Jack Pot!
Post by: vendobaldtops on January 06, 2007, 08:33:52 pm
Good eye, Doc!
Title: Jack Pot!
Post by: coke_and_stuff on January 06, 2007, 08:40:26 pm
Is the solid white roundtop the Cav CS122?? Possibly interested how much?
Joey
Joey
Title: Jack Pot!
Post by: sodaworks on January 06, 2007, 08:41:57 pm
Nice collection, I wish he was local to me.
Title: Jack Pot!
Post by: Eric on January 06, 2007, 10:07:05 pm
This is want I'd be interested in....
I don't think it's a Quikold but maybe a GE? Standard?
I don't think it's a Quikold but maybe a GE? Standard?
Title: Jack Pot!
Post by: Pat Pixley on January 06, 2007, 11:55:27 pm
I'm pretty much pumped about this trip with John next week
I may come home with something (the 7Up Lacrosse)
or nothing at all
.
But this should be a good time.
Pat
I may come home with something (the 7Up Lacrosse)
or nothing at all
.But this should be a good time.
Pat
Title: Jack Pot!
Post by: Jim on January 07, 2007, 08:01:29 am
I like the V-77!
It looks very clean!
Do you have pricing yet Johnie...?
Dr.G, the Deluxe Space Invaders was a favorite of mine as well. I had a few regular models as well as the deluxe version...
It looks very clean!
Do you have pricing yet Johnie...?
Dr.G, the Deluxe Space Invaders was a favorite of mine as well. I had a few regular models as well as the deluxe version...
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 08:48:59 am
(dr galaga @ Jan. 06 2007,8:14)
QUOTE
(johnieG @ Jan. 06 2007,5:41)
QUOTE
This Cavalier CS122 needs a Home!
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
As does this Vendo V63, In the one picture of the rear wall, you can see a Cavlier C51 peeking out,
Actually, I see a Space Invaders peeking out!
Is he getting rid of video games too?
Yes, it's for sale. I'll see what's his asking $ is today dr'G
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 08:50:28 am
(coke_and_stuff @ Jan. 06 2007,8:40)
QUOTE
Is the solid white roundtop the Cav CS122?? Possibly interested how much?
Joey
Joey
Yes, it's CS122, I'll get his $ today when I go back
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 08:52:36 am
(Eric @ Jan. 06 2007,10:07)
QUOTE
This is want I'd be interested in....
I don't think it's a Quikold but maybe a GE? Standard?
I don't think it's a Quikold but maybe a GE? Standard?
Eric, It is a GE standard wet-chest, seems complete it has the embossed lids that you see in the pic'
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 08:57:48 am
(Jim @ Jan. 07 2007,8:01)
QUOTE
I like the V-77!
It looks very clean!
Do you have pricing yet Johnie...?
Dr.G, the Deluxe Space Invaders was a favorite of mine as well. I had a few regular models as well as the deluxe version...
It looks very clean!
Do you have pricing yet Johnie...?
Dr.G, the Deluxe Space Invaders was a favorite of mine as well. I had a few regular models as well as the deluxe version...
Jim & all, I 'm going back today (Sunday the 7th) to help him sort the machines. I'll put a reserve tag & leave him a deposit to tag/hold any machines you guy & gals are interested in. & get you all pricing....
Jim , I like the V77 too,it is extra clean! (and it's mine!)
Title: Jack Pot!
Post by: sodaworks on January 07, 2007, 10:10:03 am
I maybe interested in the orange cooler behind the GE pepsi. What is it?
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 11:46:46 am
(sodaworks @ Jan. 07 2007,10:10)
QUOTE
I maybe interested in the orange cooler behind the GE pepsi. What is it?
It's a Frigidare Arctic Orange brand frozen orange-aid chest freezer from what I could tell, it's not embossed, but is "branded" with Artic Oranges' decals & a real neat metal/litho full color promo on the under-side of the lid. it looks to be about 6-8 cubic feet deep in size
I'll see if I can get it in the clear for some better pic's
Title: Jack Pot!
Post by: Jim on January 07, 2007, 04:35:13 pm
QUOTE
Jim , I like the V77 too,it is extra clean! (and it's mine!)
Are you sure you want that one...?
There's are plenty of other machines...
Just kiddin'
I would like to get an idea of what pricing is for the V-77 if you didn't mind...
Good luck securing the lot and hopefully some members can benefit from your find...
Title: Jack Pot!
Post by: johnieG on January 07, 2007, 05:48:47 pm
(Jim @ Jan. 07 2007,4:35)
QUOTE
QUOTE
Jim , I like the V77 too,it is extra clean! (and it's mine!)
Are you sure you want that one...?
There's are plenty of other machines...
Just kiddin'
I would like to get an idea of what pricing is for the V-77 if you didn't mind...
Good luck securing the lot and hopefully some members can benefit from your find...
Jim, he was asking $500 & we settled at $350.00.
It's got to be one of the cleanest originals I've ever seen, even the galvanizing is still bright!
What I'm doing is getting an Idea from members & Tagging the machines as "On Hold" for SMC ****
where " ****" = Members-Name
Until I can get his best pricing nailed down per machine for those who are interested.
He'll hold them from sale to local buyers & call-in's until I give him a go-no/go on that particular machine for a week and I'll be listing some of the others myself on ebay.
I even found a decent Seeburg trash-can Juke in the back! (no price listed) this is a 50,000 square foot warehouse & you can barley move between the areas, at least he's had it sort of arranged by type of machines, soda, jukes, arcade, slots, etc.
Title: Jack Pot!
Post by: bubba on January 07, 2007, 06:55:47 pm
Whats the deal with the trash can?
Title: Jack Pot!
Post by: Ltransam on January 07, 2007, 10:53:21 pm
Hey,JohnieG
Great Find !!! Wish I was Closer
.What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .
Ltransam
Great Find !!! Wish I was Closer
.What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .Ltransam
Title: Jack Pot!
Post by: davet426 on January 07, 2007, 10:59:49 pm
What are the units with the large cylinders on top? Just curious...
Title: Jack Pot!
Post by: collecture on January 07, 2007, 11:39:23 pm
QUOTE
What are the units with the large cylinders on top? Just curious...
I believe those are old refrigerators.
Title: Jack Pot!
Post by: SIGNGUY on January 08, 2007, 09:03:31 am
(collecture @ Jan. 07 2007,11:39)
QUOTE
QUOTE
What are the units with the large cylinders on top? Just curious...
I believe those are old refrigerators.
Yes , those are old fridges, the compressor is on the top... nice for servicing I'd guess..
Do you ever see these guys who paint those up red/white and slap on a water release decal on the front and call it a vintage Coke machine...I bet I've had three of those calls or emails over the years, and of course when I go see it or see the picture it's one of these. The discussions that insue as I go onto tell them what it is .. is usually quite amusing.
Title: Jack Pot!
Post by: Ltransam on January 08, 2007, 09:16:25 am
Yea,SIGNGUY
I'v seen a couple like that .Just last week as a matter of fact in an antuqie mall . The seller was there trying to me that it was a rare Machine
.Then I asked my Question !! Were the Bottle Opener . That Dose it for them
Ltransam
I'v seen a couple like that .Just last week as a matter of fact in an antuqie mall . The seller was there trying to me that it was a rare Machine
.Then I asked my Question !! Were the Bottle Opener . That Dose it for them Ltransam
Title: Jack Pot!
Post by: sodaworks on January 08, 2007, 10:27:47 am
old refrigerators, I have one here in line to restore for a client. We are doing it in Jack Daniels, he is a serious JD collector.
Title: Jack Pot!
Post by: MoonDawg on January 08, 2007, 12:32:56 pm
(davet426 @ Jan. 07 2007,7:59)
QUOTE
What are the units with the large cylinders on top? Just curious...
I think they are called monitor top refrigerators.
It's interesting in design. They were made as iceboxes
but later the lid could be removed and the refrigerator
unit put on top in it's place. The cooling coils under the compressor would hold 2 ice cube trays. With the cold heavy air being produced on top.......they didn't need
a fan.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 08:19:04 pm
(sodaworks @ Jan. 07 2007,10:10)
QUOTE
I maybe interested in the orange cooler behind the GE pepsi. What is it?
Here's a Pic of the Frigidare Snow Crop Orange juice chest freezer.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 08:29:54 pm
(johnieG @ Jan. 07 2007,8:50)
QUOTE
(coke_and_stuff @ Jan. 06 2007,8:40)
QUOTE
Is the solid white roundtop the Cav CS122?? Possibly interested how much?
Joey
Joey
Yes, it's CS122, I'll get his $ today when I go back
he's asking $400.00 for the CS122, it's 98% complete , it appears to be missing it's coin return knob, but the mechanisms intact in side, coinmechs there too, it's wedge in its nook really tight & I tried to get the best angle in the pictures possible, I plugined it in & it ran & got cold , racks are there as well as what looks like some spacers for different diameter bottles, look like it'll vvend cans to with some tweaking. some of the sold out windows are missing but it has one good one to copy from & it manually vended when I flicked the coinmechs nickel wisker-wire.
its a straight machine. no major dents & no noticable rust.
If you notice an orange tag on the machines, thats a "Hold" tag for SMC members
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 08:47:24 pm
(johnieG @ Jan. 07 2007,8:52)
QUOTE
(Eric @ Jan. 06 2007,10:07)
QUOTE
This is want I'd be interested in....
I don't think it's a Quikold but maybe a GE? Standard?
I don't think it's a Quikold but maybe a GE? Standard?
Eric, It is a GE standard wet-chest, seems complete it has the embossed lids that you see in the pic'
Eric. it is indeed a G.E. Standard wet chest & 100% complete right down to the cap catcher & louvered front grill. he had a tag on it asking $700.00 but he has two he says & he has to make sure this isn't another customers personel machine that he took in to restore! its twin is in another barn & I'm "encoraging" hime to let me dig it out, I think this is the one for sale as he has a tag on it...
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 08:54:23 pm
More GE
Title: Jack Pot!
Post by: coke_and_stuff on January 08, 2007, 08:57:57 pm
PM sent on the CS122
Thanks
Joey
Thanks
Joey
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 08:59:07 pm
GE PIC
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 09:04:40 pm
(bubba @ Jan. 07 2007,6:55)
QUOTE
Whats the deal with the trash can?
It's a Seegurg jukebox from the 30's
I'm thinking to gut it & make into a mini-bar (NOT!!!)
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 09:16:20 pm
(Ltransam @ Jan. 07 2007,10:53)
QUOTE
Hey,JohnieG
Great Find !!! Wish I was Closer .What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .
Ltransam
Great Find !!! Wish I was Closer
.What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .Ltransam
I found two Vernors, ones a LaCrosse the other vis a machine I've never seen before, take a look!
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 09:32:01 pm
Opps!
Title: Jack Pot!
Post by: Eric on January 08, 2007, 09:43:19 pm
PM sent...
Wow! I wish I had some extra.... a lot of extra cash.... It keeps the hope alive to
see stuff still out there!
If you snap a good clear close up of that Vernor's Knome/guy
I'll redraw it as vector art if anyone would be interested in making him a decal...
that would be cool! Nice to see an original to know what one looks like.
Wow! I wish I had some extra.... a lot of extra cash.... It keeps the hope alive to
see stuff still out there!
If you snap a good clear close up of that Vernor's Knome/guy
I'll redraw it as vector art if anyone would be interested in making him a decal...
that would be cool! Nice to see an original to know what one looks like.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 09:56:06 pm
serveral Ideal 85's
the Hires is embossed, & he has a whole barn full of parts, racks.flappers, cointowers & mech's
the Hires is embossed, & he has a whole barn full of parts, racks.flappers, cointowers & mech's
Title: Jack Pot!
Post by: Kilroy on January 08, 2007, 10:03:30 pm
Johnie, did you run across any Pepsi sliders?
Now I debate, lunch,gas and rent, or another machine?
Now I debate, lunch,gas and rent, or another machine?
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:28:00 pm
Glasco GV50, again note that he has many parts machines to complete the machine.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:31:33 pm
A Ideal/7up upright machine, Yes Ideal made upright vendors to! this is a model 10-8 thats 10 ports & 8 bottles per shelf..he has two of this same model.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:34:16 pm
(johnieG @ Jan. 08 2007,9:16)
QUOTE
(Ltransam @ Jan. 07 2007,10:53)
QUOTE
Hey,JohnieG
Great Find !!! Wish I was Closer .What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .
Ltransam
Great Find !!! Wish I was Closer
.What the $ Vernors . ? And Could you get a few better Pic ? I know it's tight in there but it's hard to see but very little of what's there .And Thanks for inclueding us in your FIND .Ltransam
I found two Vernors, ones a LaCrosse the other vis a machine I've never seen before, take a look!
More of the Vernors Ferromatic
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:40:56 pm
A vendo Thriftvend V56 asking $450. complete clean, straight, runs
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:44:25 pm
Pat Pixleys LaCrosse 7up/IL 90
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:50:34 pm
Lots of westinghouse & cavalier chest coolers wet & dry
Title: Jack Pot!
Post by: collecture on January 08, 2007, 10:51:01 pm
Wow - you were not kidding when you said 'Jackpot'!
I hope anyone and everyone here gets something out of this.
Thanks for sharing the find with everybody!
Too bad for me - I got four machines coming my way in the next couple of weeks.
No way I could swing another machine.
The wife would be very unhappy!
Johnnie,
I would, however, be interested in a rack with flapper and an old camelhump type mech for an Ideal 35.
Let me know if he has any for sale.
I hope anyone and everyone here gets something out of this.
Thanks for sharing the find with everybody!
Too bad for me - I got four machines coming my way in the next couple of weeks.
No way I could swing another machine.
The wife would be very unhappy!
QUOTE
...he has a whole barn full of parts, racks.flappers, cointowers & mech's...
Johnnie,
I would, however, be interested in a rack with flapper and an old camelhump type mech for an Ideal 35.
Let me know if he has any for sale.
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 10:52:17 pm
A Westinghouse WS 42T early model, no rack inside, but the rest is complete, he said he may have the rack in the other barn, or a parts machine to complete.
Title: Jack Pot!
Post by: Yarochrehc on January 08, 2007, 10:57:54 pm
johnieG,
Is that a 7up picnic cooler on the left next to Pat Pixleys LaCrosse 7up Machine?
Is that a 7up picnic cooler on the left next to Pat Pixleys LaCrosse 7up Machine?
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 11:04:29 pm
kelvenator standard embossed dry chest sorry for the poor picture, but i couldn't get it away from the wall as it was pinned by a pile of 70's rock-ola 'jukes & I was hanging upside down to get the front pic!
Title: Jack Pot!
Post by: Yarochrehc on January 08, 2007, 11:05:49 pm
This guy sure has a lot of nice machines for everyone. Great to see!
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 11:12:39 pm
whew! yes he does!,,this is the last pic for tonight...
a very nice Victor standard from the late 60's straight lids & clean inside, gets cold...
a very nice Victor standard from the late 60's straight lids & clean inside, gets cold...
Title: Jack Pot!
Post by: Pat Pixley on January 08, 2007, 11:14:34 pm
Well I know I can't wait to get down there
and see all of this John. With all these
other photo's of machine's I really need to
take a look around
. So many machine's
and hoping to win the lottery
Pat
and see all of this John. With all these
other photo's of machine's I really need to
take a look around
. So many machine's and hoping to win the lottery
Pat
Title: Jack Pot!
Post by: cvb141 on January 08, 2007, 11:18:59 pm
I hope anyone wanting something from this jackpot, gets it. Good luck.
Jerry
Jerry
Title: Jack Pot!
Post by: johnieG on January 08, 2007, 11:30:32 pm
I'll help in any way I can, here's the last picture I wanted to post tonight ( my clicky finger is worn out!)
it's complete but dissasembled Vendo V39, he's asking $800 which is what he paid for it supposably, a bit too high in my option, but a nice straight machine thats rust free & as stated, complete. perhaps "cash" in hand will change his mind. (lower the price)
it's complete but dissasembled Vendo V39, he's asking $800 which is what he paid for it supposably, a bit too high in my option, but a nice straight machine thats rust free & as stated, complete. perhaps "cash" in hand will change his mind. (lower the price)
Title: Jack Pot!
Post by: SIGNGUY on January 09, 2007, 12:19:53 am
Johnnie,
Looks like some older Coke sign leaning up behind the V39?? Does he have any other vintage signs, metal,tin, porcelain, clocks or that type of stuff!
I PM'd you as well....
Great score...
I'm interested in some parts for an ideal 35 slider as well with Tom/Collecture... He asked first, so if there happens to be two coin mechs and or Racks for the ideal 35... Let me know too.
Thanks
John / Signguy
Looks like some older Coke sign leaning up behind the V39?? Does he have any other vintage signs, metal,tin, porcelain, clocks or that type of stuff!
I PM'd you as well....
Great score...
I'm interested in some parts for an ideal 35 slider as well with Tom/Collecture... He asked first, so if there happens to be two coin mechs and or Racks for the ideal 35... Let me know too.
Thanks
John / Signguy
Title: Jack Pot!
Post by: Marvin on January 09, 2007, 12:51:54 am
Holy cow!!!! What a find! I must resist the temptation to buy. Keep posting all the pics.
Marvin
Marvin
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 07:38:37 pm
More, more ,more! oh darn!
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 07:43:36 pm
Big Boy!
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 07:45:52 pm
By special request, some other items.
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 07:47:26 pm
Bowling anyone? ( Yes I was playing with the middle one!)
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 07:50:24 pm
Order is slowly appearing from the chaos! A row you can walk down!
Title: Jack Pot!
Post by: Kilroy on January 09, 2007, 07:58:44 pm
Must...fight..urge...to ..buy...
Ok, I'm having Deja vue loking at thepictures. Johnie, is the warehouse in Mt Clemens? It seems so familiar, I am wondering if i'been to the shop/warehouse.....
Ok, I'm having Deja vue loking at thepictures. Johnie, is the warehouse in Mt Clemens? It seems so familiar, I am wondering if i'been to the shop/warehouse.....
Title: Jack Pot!
Post by: dr galaga on January 09, 2007, 08:37:01 pm
Oh my...that is a 
jackpot!
Sure wish I wasn't still paying off my Cav. restoration (though my wife is probably happy!).
jackpot! Sure wish I wasn't still paying off my Cav. restoration (though my wife is probably happy!).
Title: Jack Pot!
Post by: collecture on January 09, 2007, 08:56:38 pm
wow!.....wow!........I mean wow!
I....too....must....resist....the ....urge....to....buy....must ....resist.....
There coming to take me away!...ha haaaaa
I....too....must....resist....the ....urge....to....buy....must ....resist.....
There coming to take me away!...ha haaaaa
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 09:39:20 pm
(Kilroy @ Jan. 09 2007,7:58)
QUOTE
Must...fight..urge...to ..buy...
Ok, I'm having Deja vue loking at thepictures. Johnie, is the warehouse in Mt Clemens? It seems so familiar, I am wondering if i'been to the shop/warehouse.....
Ok, I'm having Deja vue loking at thepictures. Johnie, is the warehouse in Mt Clemens? It seems so familiar, I am wondering if i'been to the shop/warehouse.....
I know the dealer you're thinking of, but that one's closed, & he moved.
Title: Jack Pot!
Post by: johnieG on January 09, 2007, 09:41:10 pm
(collecture @ Jan. 09 2007,8:56)
QUOTE
wow!.....wow!........I mean wow!
I....too....must....resist....the ....urge....to....buy....must ....resist.....
There coming to take me away!...ha haaaaa
I....too....must....resist....the ....urge....to....buy....must ....resist.....
There coming to take me away!...ha haaaaa
Come to the dark side! resistance is futile
besides they're like peanuts ( rather large peanuts ) you can't have just one!
Title: Jack Pot!
Post by: SIGNGUY on January 09, 2007, 10:21:06 pm
I'm speechless...... What a Find... Great bowling machines... If Only I had the room!!!! How much is he asking for those?? Also, what about any other Juke boxes are there more.. that Rockola is sweet... How bout Coke signs???
Is there a forward air near you, so if I break into the Kids college funds to buy a few items... what do you propose we do for shipping?? would you assist if there is a forward air in Detroit... haven't taken the time to look yet? but if so, items would need to be crated? how much of a pain would this be??
Is there a forward air near you, so if I break into the Kids college funds to buy a few items... what do you propose we do for shipping?? would you assist if there is a forward air in Detroit... haven't taken the time to look yet? but if so, items would need to be crated? how much of a pain would this be??
Title: Jack Pot!
Post by: johnieG on January 10, 2007, 12:59:05 am
(SIGNGUY @ Jan. 09 2007,10:21)
QUOTE
I'm speechless...... What a Find... Great bowling machines... If Only I had the room!!!! How much is he asking for those?? Also, what about any other Juke boxes are there more.. that Rockola is sweet... How bout Coke signs???
Is there a forward air near you, so if I break into the Kids college funds to buy a few items... what do you propose we do for shipping?? would you assist if there is a forward air in Detroit... haven't taken the time to look yet? but if so, items would need to be crated? how much of a pain would this be??
Is there a forward air near you, so if I break into the Kids college funds to buy a few items... what do you propose we do for shipping?? would you assist if there is a forward air in Detroit... haven't taken the time to look yet? but if so, items would need to be crated? how much of a pain would this be??
The one machine I was playing in the middle was listed for $750 it's skittle bowler you play with a metal puck, the one on the far left with the large white pins you play with a mini bowling-ball . it was listed for $800
He has some clocks up on the walls, I'll try to snap some pictures for you, no to many signs, the coke sign you saw behind the Lacrosse 7up machine is a painted metal sign that goes (went) on front off of an old display rack for a grocery store, he also has them in 7up, & pepsi, about 12" wide & 3' long. nothing special, $10-bucks ea. there is Forward air down in Detroit, but the require crating, when I have to ship via them, I just hire craters-n-freighters, or take my soda machines up to Fedexfreight in flint, they just need it on a pallet & strapped down ( I also cover it in cardboard & shrink-wrap my machines) they are more than Forward air, but a lot less of a hassle, I get a 40% discount from Fedex for all freight collect shipments (terminal to terminal) which helps out, & I can haul it up to Flint,
Title: Jack Pot!
Post by: SIGNGUY on January 10, 2007, 09:57:08 am
Thanks Johnnie... does he have any complete generic sliders? ideal or glasco...
Title: Jack Pot!
Post by: rogerz on January 10, 2007, 10:15:32 am
johnie
I PM'd you on the Westinghouse left/wet
Thanks
rz
I PM'd you on the Westinghouse left/wet
Thanks
rz
Title: Jack Pot!
Post by: MoonDawg on January 10, 2007, 10:23:37 am
I am interested in that Glasco slider, complete or not.
If we have enough interest, maybe someone here will rent
a truck and drop off these items all across the country for a fee.
Great adventure for that cross country team during spring break. When they get out here to California, we can send some stuff
back east with them.
If we have enough interest, maybe someone here will rent
a truck and drop off these items all across the country for a fee.
Great adventure for that cross country team during spring break. When they get out here to California, we can send some stuff
back east with them.
Title: Jack Pot!
Post by: johnieG on January 10, 2007, 12:25:03 pm
(SIGNGUY @ Jan. 10 2007,9:57)
QUOTE
Thanks Johnnie... does he have any complete generic sliders? ideal or glasco...
Only the Ideal 85's I've shown , no 55's or 35's to be seen, & only one Glasco GV50/Coke he has parts for all of the sliders I've mentioned to sell you a complete machine.
Title: Jack Pot!
Post by: johnieG on January 10, 2007, 12:26:51 pm
(MoonDawg @ Jan. 10 2007,10:23)
QUOTE
I am interested in that Glasco slider, complete or not.
If we have enough interest, maybe someone here will rent
a truck and drop off these items all across the country for a fee.
Great adventure for that cross country team during spring break. When they get out here to California, we can send some stuff
back east with them.
If we have enough interest, maybe someone here will rent
a truck and drop off these items all across the country for a fee.
Great adventure for that cross country team during spring break. When they get out here to California, we can send some stuff
back east with them.
'Moon I'll get a price out of him for you, I've alraedy 'Tagged" it as a hold for SMC, I figure someone would want it!
Title: Jack Pot!
Post by: davethebirdman on January 10, 2007, 01:37:47 pm
Glen that's a great idea and the sort of adventure I would have loved to have done...
Before kids arrived.
Dave
Before kids arrived.
Dave
Title: Jack Pot!
Post by: Yarochrehc on January 10, 2007, 08:12:49 pm
John, sorry to bug you, have you found out any more on the Monitor refrigerators?
Thanks
Thanks
Title: Jack Pot!
Post by: johnieG on January 10, 2007, 09:16:57 pm
(Yarochrehc @ Jan. 10 2007,8:12)
QUOTE
John, sorry to bug you, have you found out any more on the Monitor refrigerators?
Thanks
Thanks
Yes , the one you saw with the pepsi logo/decal may have a leak he said ( not a good thing with an ammonia system), but you can have your pick of any of the others for $250! Pat & I can pick out a nice one for you. I think i can transplant a working compressor assy to the others lower chassis, & that should work nicely!
how does this sound, if those who are interested in any of the machines be they soda or otherwise, if you can PM me you cell No.s you can do a little real-time haggling between you & the owner, I can give the machines a going over & locate parts. then Pat & I can pull asside ours & your machines, he can store it there for a while, & I have a local storage unit too you can use. until you can figure out shipping,
Title: Jack Pot!
Post by: Jim on January 11, 2007, 07:23:37 am
Johnie,
On behalf of everyone here at SMC, I would like to Thank You for extending an open invitation to everyone! I hope all those involved get an opportunity to get something they like and at what seems to be very reasobable prices ! ! !
And Pat, I Thank You for helping in this matter too!
Lastly, I don't want any broken backs while moving all these machines!
Oh yea, are still sure about the V-77...?
On behalf of everyone here at SMC, I would like to Thank You for extending an open invitation to everyone! I hope all those involved get an opportunity to get something they like and at what seems to be very reasobable prices ! ! !
And Pat, I Thank You for helping in this matter too!
Lastly, I don't want any broken backs while moving all these machines!
Oh yea, are still sure about the V-77...?
Title: Jack Pot!
Post by: cormy on January 11, 2007, 09:31:27 am
I must say this man is something of a hero offering to be the "middle man" in all this. I have been involved in similar situations on a smaller scale and it can be a real hassle trying to make everybody happy. I think this group has a great working relationship and all parties will be satisfied in the end! Take advantage of this opportunity, who knows when it will happen again. Good luck guys!!
Title: Jack Pot!
Post by: Pat Pixley on January 11, 2007, 11:11:48 am
Hey Thanks Jim, But I'm just happy John gave me a call
and asked me if I would like to come along.
I'm
going to bring along my refrigerator dolly to help out
on this so there are no broke backs.
P.S. Jim I'll try and sneak that V77 out with out John
seeing me( HA HA ).
Pat
and asked me if I would like to come along.
I'm going to bring along my refrigerator dolly to help out
on this so there are no broke backs.
P.S. Jim I'll try and sneak that V77 out with out John
seeing me( HA HA ).
Pat
Title: Jack Pot!
Post by: TomFromJersey on January 11, 2007, 06:31:34 pm
Hi John
Sent you a PM yesterday with my number. I'm interested in the Jukes. Did you get my info ok?
Thanks
Sent you a PM yesterday with my number. I'm interested in the Jukes. Did you get my info ok?
Thanks
Title: Jack Pot!
Post by: johnieG on January 11, 2007, 07:33:40 pm
(TomFromJersey @ Jan. 11 2007,6:31)
QUOTE
Hi John
Sent you a PM yesterday with my number. I'm interested in the Jukes. Did you get my info ok?
Thanks
Sent you a PM yesterday with my number. I'm interested in the Jukes. Did you get my info ok?
Thanks
Tom , Yes I got you rcontact info, & I'll call you later on..JohnieG
Title: Jack Pot!
Post by: johnieG on January 11, 2007, 09:34:58 pm
Tick-Tock.....
Well I'm taking tomorrow (Friday) off to help arrange the machines in some resemblance of order.
the walk thru date has been bumped up to this Saturday, Jan. the 13th. as our "host" ( Mr. J. that is not myself) won't be able to make it on Sunday, and with out him, there is no access to the warehouse, ( as if putting 75 - slot machines in a row wasn't enough!)
I've PM'd those who've contact me & requested your cell phone numbers so I can contact those who are interested in any of the mentioned machine, or anything else you may be looking for...( I won't share these with any others) & I think this may work out to be the best way to keep it all straight...and make it alot easier to negotiate pricing offers, etc.
the warehouse has a dock for loading & a forklift too.
Shipping, I can help transport machines to the Fedexfreight Dock locally, (Flint) they don't require crating, just a pallet & cardboarded & shrink-wrapped, (they know me well!) I get a 40% discount for freight collect to the terminal nearest you...all I ask is you replace my gas in my truck! you can get a quick quote online at www.fedexfreight.com & apply 40% off.
There is also a Forward Air terminal down at Detroit Metro airport, but be aware that the Detroit Forward air terminal requires all machines to be crated ( I know it's a pain in the @$$) I can transport to them, but you'll have to deal with them directly to have it shipped out.
( they have a contractor who will provide crating services)
So PM me your contact info if you'd like & we'll (Pat & I) will be talking to you then ( & lot's more pictures too, I promise!)
Well I'm taking tomorrow (Friday) off to help arrange the machines in some resemblance of order.
the walk thru date has been bumped up to this Saturday, Jan. the 13th. as our "host" ( Mr. J. that is not myself) won't be able to make it on Sunday, and with out him, there is no access to the warehouse, ( as if putting 75 - slot machines in a row wasn't enough!)
I've PM'd those who've contact me & requested your cell phone numbers so I can contact those who are interested in any of the mentioned machine, or anything else you may be looking for...( I won't share these with any others) & I think this may work out to be the best way to keep it all straight...and make it alot easier to negotiate pricing offers, etc.
the warehouse has a dock for loading & a forklift too.
Shipping, I can help transport machines to the Fedexfreight Dock locally, (Flint) they don't require crating, just a pallet & cardboarded & shrink-wrapped, (they know me well!) I get a 40% discount for freight collect to the terminal nearest you...all I ask is you replace my gas in my truck! you can get a quick quote online at www.fedexfreight.com & apply 40% off.
There is also a Forward Air terminal down at Detroit Metro airport, but be aware that the Detroit Forward air terminal requires all machines to be crated ( I know it's a pain in the @$$) I can transport to them, but you'll have to deal with them directly to have it shipped out.
( they have a contractor who will provide crating services)
So PM me your contact info if you'd like & we'll (Pat & I) will be talking to you then ( & lot's more pictures too, I promise!)
Title: Jack Pot!
Post by: Kilroy on January 11, 2007, 09:55:27 pm
Still...fighting..must....not.....succumb...
Can someone here arrange an intervention for me?
Can someone here arrange an intervention for me?
Title: Jack Pot!
Post by: Creighton on January 11, 2007, 10:04:35 pm
Thanks for all the good work guys!!
Are there group rates on interventions? Going nuts here as well
Creighton
Are there group rates on interventions? Going nuts here as well
Creighton
Title: Jack Pot!
Post by: SIGNGUY on January 11, 2007, 10:08:49 pm
SLOT MACHINES>>>> I didn't hear abot these??? what has he got for slots. I'm looking for an original 25 cent machine from a casino.. .working..
thanks
thanks
Title: Jack Pot!
Post by: dr galaga on January 11, 2007, 10:09:14 pm
(Kilroy @ Jan. 11 2007,8:55)
QUOTE
Still...fighting..must....not.....succumb...
Can someone here arrange an intervention for me?
Can someone here arrange an intervention for me?
You can yank the network cable out of your computer...or, if you are married, you can tell your wife your interest in some machines. Both of these will instantly stop your desire for more machines!
Title: Jack Pot!
Post by: bubba on January 12, 2007, 08:20:02 am
(SIGNGUY @ Jan. 11 2007,10:08)
QUOTE
SLOT MACHINES>>>> I didn't hear abot these??? what has he got for slots. I'm looking for an original 25 cent machine from a casino.. .working..
thanks
thanks
Yeah.... whats up with the slot machines???
Title: Jack Pot!
Post by: SIGNGUY on January 12, 2007, 09:59:12 am
Johnnie
I'll PM you my cell if nots too late.. If your checking tonite, would like some more info on the slots? price and condition.
Thanks much... hope your back survived today... I'm sure it was fun "Playing" with all those machines today!!
I'll PM you my cell if nots too late.. If your checking tonite, would like some more info on the slots? price and condition.
Thanks much... hope your back survived today... I'm sure it was fun "Playing" with all those machines today!!
Title: Jack Pot!
Post by: Pat Pixley on January 12, 2007, 09:57:31 pm
I would like to also add I to can store some stuff
up at my place I have lots of room and it can be
stored as long as you need.
Just drop me a line with a number.
This is like going into willie wonka factory, Like
John said there will be alot of photo's.
Pat
up at my place I have lots of room and it can be
stored as long as you need.
Just drop me a line with a number.
This is like going into willie wonka factory, Like
John said there will be alot of photo's.
Pat
Title: Jack Pot!
Post by: johnieG on January 12, 2007, 11:16:26 pm
SIGNGUY
Yep, I got it!
Yep, I got it!
Title: Jack Pot!
Post by: Eric on January 12, 2007, 11:57:46 pm
Pat or someone get a good, clear, straight on shot of that little Vernors
guy decal/logo I'd like to see if I can redraw that if someone would be
interested... Good luck guys... wish I had the cash...
But just in case a Quikold pops up... contact me!
guy decal/logo I'd like to see if I can redraw that if someone would be
interested... Good luck guys... wish I had the cash...
But just in case a Quikold pops up... contact me!
Title: Jack Pot!
Post by: Pat Pixley on January 13, 2007, 12:24:44 am
Eric, consider it done on the photo and as far
as the quikold drop John your number .
Pat
OH yeah and I would be interested.
as the quikold drop John your number .
Pat
OH yeah and I would be interested.
Title: Jack Pot!
Post by: Yarochrehc on January 13, 2007, 01:43:46 pm
(johnieG @ Jan. 10 2007,9:16)
QUOTE
[/quote]
Yes , the one you saw with the pepsi logo/decal may have a leak he said ( not a good thing with an ammonia system), but you can have your pick of any of the others for $250! Pat & I can pick out a nice one for you. I think i can transplant a working compressor assy to the others lower chassis, & that should work nicely!
Yes , the one you saw with the pepsi logo/decal may have a leak he said ( not a good thing with an ammonia system), but you can have your pick of any of the others for $250! Pat & I can pick out a nice one for you. I think i can transplant a working compressor assy to the others lower chassis, & that should work nicely!
Hi John,
If you can find a good working refrigerator either as it's self or to mix parts to make it work that's ok.
I PM'd you my cell phone number.
Thanks, Bob
Title: Jack Pot!
Post by: davet426 on January 13, 2007, 06:22:13 pm
Johnie, I will be in Michigan for training the last week of this month. Any possibility of getting with you (or the owner) and looking at some Jukes up there? I am only intereseted in getting one at the moment.
I may have an offer on my house in Michigan, If the sale goes through I have to haul some things back down to Nashville. I could probably help with delivery to the surrounding areas if everyone is willing to help me break even on cost. I'll keep you posted on the sale. Hopefully I hear something early next week
I may have an offer on my house in Michigan, If the sale goes through I have to haul some things back down to Nashville. I could probably help with delivery to the surrounding areas if everyone is willing to help me break even on cost. I'll keep you posted on the sale. Hopefully I hear something early next week
Title: Jack Pot!
Post by: johnieG on January 13, 2007, 06:57:30 pm
We're Baaack!
Well what at trip! here's a "where's Waldo" (Pat Pixley) picktup taken as I stood a top of a tall machine, to give you some idea od the scope of this 12,000 foot warehouses stock...
Well what at trip! here's a "where's Waldo" (Pat Pixley) picktup taken as I stood a top of a tall machine, to give you some idea od the scope of this 12,000 foot warehouses stock...
Title: Jack Pot!
Post by: johnieG on January 13, 2007, 06:59:43 pm
now a scan to the left...kind of gives you a scope of the size of this place!
Title: Jack Pot!
Post by: johnieG on January 13, 2007, 08:04:06 pm
Well , I think it went well. seems everybody got something they were looking for,
coke_and_stuff scored his Cavalier CS122 for a nice price & has an eye on a choice Seeburg 110-a series Selectomatic.
TomFromJersey had a long and hopefully productive talk with the owner "Big John" on a bunch of Wurlizters & Rockolas Jukes' & such.
Pat Pixley was making Doe-Eyes at an Atlas Ideal-55a
I found Yarochrehc a nice working Monitor top Westinghouse refrigerator.
I found MoonDawg his Glasco silder too!
Me. I have my Nessbits Vendo v-126/transitional. a Vendo V-77/Coke, & I found a decent Westinghouse 42-T Coke machine, no shelves, but complete with a full/working coinmech-crankhandle & refrigeration system ($100!!!)
we also unearthed the Cavalier C51 seen in the earlier pic's, its really just a shell & refrigeration system. no ammo belt..
Pat will forward the pictures on his camera later tonight & we'll post them then!
and somebody needed a "gnome" shot, we couldn't get the Vernors LaCrosse-56 out in the open enough to get a clean shot at the little bugger! ( crafty those gnomes!) but here's a vernors sign the might suffice..
coke_and_stuff scored his Cavalier CS122 for a nice price & has an eye on a choice Seeburg 110-a series Selectomatic.
TomFromJersey had a long and hopefully productive talk with the owner "Big John" on a bunch of Wurlizters & Rockolas Jukes' & such.
Pat Pixley was making Doe-Eyes at an Atlas Ideal-55a
I found Yarochrehc a nice working Monitor top Westinghouse refrigerator.
I found MoonDawg his Glasco silder too!
Me. I have my Nessbits Vendo v-126/transitional. a Vendo V-77/Coke, & I found a decent Westinghouse 42-T Coke machine, no shelves, but complete with a full/working coinmech-crankhandle & refrigeration system ($100!!!)
we also unearthed the Cavalier C51 seen in the earlier pic's, its really just a shell & refrigeration system. no ammo belt..
Pat will forward the pictures on his camera later tonight & we'll post them then!
and somebody needed a "gnome" shot, we couldn't get the Vernors LaCrosse-56 out in the open enough to get a clean shot at the little bugger! ( crafty those gnomes!) but here's a vernors sign the might suffice..
Title: Jack Pot!
Post by: Pat Pixley on January 13, 2007, 11:58:13 pm
WOW WHAT A TRIP !!!
Well I meet John at his home today
and we made track's to this place and I've
never seen so much stuff soda machine ,
Drive in speakers, Jukes, slot's & games.
And Yes I'm making Doe eye's at that
Atlas 55 or there could be something else.
Well This was way better than It's A Small World
ride at Disney world Right John
Thanks again John.
Pat
Well I meet John at his home today
and we made track's to this place and I've
never seen so much stuff soda machine ,
Drive in speakers, Jukes, slot's & games.
And Yes I'm making Doe eye's at that
Atlas 55 or there could be something else.
Well This was way better than It's A Small World
ride at Disney world Right John
Thanks again John.
Pat
Title: Jack Pot!
Post by: Pat Pixley on January 14, 2007, 12:39:02 am
Oh yeah here are a few more photo's
and Again WOW!!
Pat
and Again WOW!!
Pat
Title: Jack Pot!
Post by: Yarochrehc on January 14, 2007, 03:54:55 pm
John,
Is that a Westinghouse WE-6 cooler next to the Vendo machine in Pats last picture? If so, is it in decent shape and does it work, and how much?
Bob
Ill PM you as well
Is that a Westinghouse WE-6 cooler next to the Vendo machine in Pats last picture? If so, is it in decent shape and does it work, and how much?
Bob
Ill PM you as well
Title: Jack Pot!
Post by: Kilroy on January 14, 2007, 04:22:30 pm
Is it too late to PM wishlists?
Title: Jack Pot!
Post by: johnieG on January 14, 2007, 06:02:11 pm
(Kilroy @ Jan. 14 2007,4:22)
QUOTE
Is it too late to PM wishlists?
Kilroy...I'll be of work Monday for the MLK holiday, and I'll be going back to address some pricing with the owner "BigJohn" if you like to give me a list & PM me you cell # , I'll see what I can do.
Title: Jack Pot!
Post by: johnieG on January 14, 2007, 06:06:05 pm
(Yarochrehc @ Jan. 14 2007,3:54)
QUOTE
John,
Is that a Westinghouse WE-6 cooler next to the Vendo machine in Pats last picture? If so, is it in decent shape and does it work, and how much?
Bob
Ill PM you as well
Is that a Westinghouse WE-6 cooler next to the Vendo machine in Pats last picture? If so, is it in decent shape and does it work, and how much?
Bob
Ill PM you as well
It is a WE-6 but It's on consignment and not part of the warehouse items proper, the owner has had it there for two years with an asking price of $1000, and now you know why it's still sitting there! it's in Primo shape though, but not for $1k-buck...(unless you really like it!)
Title: Jack Pot!
Post by: Yarochrehc on January 16, 2007, 11:21:38 pm
(johnieG @ Jan. 14 2007,6:06)
QUOTE
It is a WE-6 but It's on consignment and not part of the warehouse items proper, the owner has had it there for two years with an asking price of $1000, and now you know why it's still sitting there! it's in Primo shape though, but not for $1k-buck...(unless you really like it!)
Your right John,
Too much money. Thanks anyway.
Title: Jack Pot!
Post by: MCarter on January 17, 2007, 08:27:39 am
How much for the Tear drop Speakers? Oh also the slot machines?
Thanks
Thanks
Title: Jack Pot!
Post by: johnieG on January 17, 2007, 08:45:32 am
He had $250/Pair listed on them, the late model Slots seen in the pictures range from $150-800 depending on which model. I'm not a slot collector, so I've no idea, he also has earlier 5-10-25-50-cent slot machines, if you wish PM me & I'll get you in contact with him.
Title: Re: Jack Pot!
Post by: collecture on September 16, 2007, 01:10:21 pm
Johnnieg,
Have you weeded through the machines yet and gotten to the room full of parts?
Still wanting a rack and camel hump mech for an Ideal 35 if he has one.
Thanks!
Have you weeded through the machines yet and gotten to the room full of parts?
Still wanting a rack and camel hump mech for an Ideal 35 if he has one.
Thanks!
Title: Re: Jack Pot!
Post by: johnieG on September 16, 2007, 04:45:10 pm
when the warehouse was cleared out, there were very few Ideal parts around, I picked up a rack & a cap catcher for an Ideal-55. I picked up 2 glasco-50/Cokes & a Hires rootbeer (Ideal-55), Pat Pixley scored a Ideal-55 Atlas beverages slider. the rest of the machines (sliders) were mostly Ideal 85s & were sold to another local dealer, the warehouse is now vacant & empty. & he's moved into his new building (right across the parking lot) but he may have some parts squireled away, you can give him a call at "games people play", in MtClemens, Michigan. (586) 469-8353 , John is the owners name
they also have a website... http://www.games-peopleplay.com (http://www.games-peopleplay.com)
they also have a website... http://www.games-peopleplay.com (http://www.games-peopleplay.com)
Title: Re: Jack Pot!
Post by: collecture on September 16, 2007, 04:50:23 pm
Thanks!
Title: Re: Jack Pot!
Post by: Crazzy Canuck on February 22, 2010, 07:16:28 pm
Story of my life. Too late again!!!