|
Title: Seal between cabinet and door Post by: davet426 on December 23, 2006, 11:59:17 am Well finally some time off for the holiday to start on my machines. New tools and compressor are itching to go! I thought my Cav was original paint but the more I look at it I'm wondering???
The rubber seal for the door should it be black on the outside when the door is closed? Mine is painted red. If it is suppose to black is there a good paint stripper for rubber? Or would I be better off purchasing a new one If better of purchasing a new one? From where? Thanks Title: Seal between cabinet and door Post by: davethebirdman on December 23, 2006, 01:23:35 pm Are you talking about the main door gasket?? If so, I have just had a quick look in my Funtronics Cat and can't see any pre-formed and drilled ones for the CAVALIER. But they do have material like the original for 1.50 a foot.
Don't know if Soda Jerk has it pre-formed. If you can get it pre-formed I think its worth the extra. Otherwise, personally I'd just replace it. Dave Title: Seal between cabinet and door Post by: SIGNGUY on December 23, 2006, 02:01:35 pm If it's painted, then pretty good chance the machine was repainted..originals should be all black..
I'd replace it if your going throug the trouble of repainting anyways... Title: Seal between cabinet and door Post by: sodaworks on December 23, 2006, 03:19:34 pm I would replace them. The SodaJerk Works or Funtronics will have all the parts you need.
Title: Seal between cabinet and door Post by: aspbear1 on December 23, 2006, 04:53:27 pm Replace it, they do not cost that much and can really save some headaches as for as cooling.
|