|
Title: Serial Number Tag Placement Post by: dr galaga on November 29, 2006, 10:08:21 pm I have the machine almost all together.
Where is the correct spot to put the plate with the serial number info? It looked like the tag moved around a few times on my machine and I had them fill in all the holes when I got it painted. Now I need to know where the factory put it. Title: Serial Number Tag Placement Post by: Pat Pixley on November 29, 2006, 10:55:36 pm Brent on my Vernors Cav.80 The Id tag was on the
Left hand side (IF your facing the machine ) and all the way back and equil to the spilt in the bottle door. here is a photo of mine. Also I used all purpose spray adhesive for my new wiring diagram it has worked but make sure you hit the corners real good. Pat Title: Serial Number Tag Placement Post by: dr galaga on December 01, 2006, 05:29:32 pm Thanks. That what I thought. I remember seeing a picture of one and the tag was just below where the red starts (which equals thw split in the bottle door.
Title: Serial Number Tag Placement Post by: davet426 on December 03, 2006, 07:20:21 pm heres mine if it helps.
Title: Serial Number Tag Placement Post by: dr galaga on December 03, 2006, 07:38:10 pm Thanks Dave. I ended up putting it one inch below the white.
Title: Serial Number Tag Placement Post by: sodaworks on December 05, 2006, 11:02:30 pm I always move the tag to the backside of the machine. The info's still there but you don't have to look at it.
Title: Serial Number Tag Placement Post by: BrianB on December 06, 2006, 07:17:31 am Looks good, Brent!
|