Title: Need help with my first machine...
Post by: on November 28, 2006, 10:20:35 am
Hi, I just purchased my FIRST machine 
./.....
It's a Choice vend CVC 299.. I cleaned it up filled it up
and thought every thing was fine until..
After the second vend nothing.. What it does is vends two cans OK. Then nothing for two vends. Then two cans.
Break down..
2 vends 2 cans, 2 vends no cans, 2 vends 2 cans, 2 vends no cans.....
please help, I have NO manual
./..... It's a Choice vend CVC 299.. I cleaned it up filled it up
and thought every thing was fine until..
After the second vend nothing.. What it does is vends two cans OK. Then nothing for two vends. Then two cans.
Break down..
2 vends 2 cans, 2 vends no cans, 2 vends 2 cans, 2 vends no cans.....
please help, I have NO manual
Title: Need help with my first machine...
Post by: Kevin C on November 29, 2006, 09:18:52 am
Hello
I think I can help. Owned, repaired & sold a large CV. I know the workings very well plus I have 3 copies of the manual.
If you would like a manual the cost is $8. Post your address.
I have a whole box of extra parts for a CV from a machine I parted out.
Kevin
I think I can help. Owned, repaired & sold a large CV. I know the workings very well plus I have 3 copies of the manual.
If you would like a manual the cost is $8. Post your address.
I have a whole box of extra parts for a CV from a machine I parted out.
Kevin
Title: Need help with my first machine...
Post by: on November 29, 2006, 06:01:18 pm
Hi Kevin, That will be great.... I'll send the 8 $ ...
What do you think the problem is?
My address is:
John Edelman
610 5th ave
Montgomery wv 25136
What do you think the problem is?
My address is:
John Edelman
610 5th ave
Montgomery wv 25136
Title: Need help with my first machine...
Post by: on November 29, 2006, 07:11:42 pm
I need your address to send payment.
John
John
Title: Need help with my first machine...
Post by: Kevin C on November 29, 2006, 09:41:05 pm
John
First try this. Underneath the vending box (bottom part that has the spindles) each vending row has a loading switch. Ths switch looks like a little "L" shaped wire. Push that switch up & that vending row will cycle. This will allow you to check the loading of a row & see any problems or hang ups during the vend cycle.
The next thing would be to check very back spacer on each row. you will see that there are adjustment screws that move this spacer forward & back. For cans adjust the back spacer as far back as possible.
Try these two things.
You can pay me with paypal. Send the $8 to the following email address
b2673ad@belsouth.net
or send me a check to
Kevin Colson
1326-A Ben Sawyer Blvd
Mt Pleasant, SC 29464
Kevin
First try this. Underneath the vending box (bottom part that has the spindles) each vending row has a loading switch. Ths switch looks like a little "L" shaped wire. Push that switch up & that vending row will cycle. This will allow you to check the loading of a row & see any problems or hang ups during the vend cycle.
The next thing would be to check very back spacer on each row. you will see that there are adjustment screws that move this spacer forward & back. For cans adjust the back spacer as far back as possible.
Try these two things.
You can pay me with paypal. Send the $8 to the following email address
b2673ad@belsouth.net
or send me a check to
Kevin Colson
1326-A Ben Sawyer Blvd
Mt Pleasant, SC 29464
Kevin
Title: Need help with my first machine...
Post by: on November 29, 2006, 10:01:23 pm
By the way, as far as parts do you have any of the sold out lights??? I need 3 maybe 4 ..
Let me know, I'll be in SC this weekend. If you have the parts could I pick them up with the manual???
Let me know, I'll be in SC this weekend. If you have the parts could I pick them up with the manual???
Title: Need help with my first machine...
Post by: on November 30, 2006, 10:38:31 am
Well I must be a genus HA HA NOT !!! .... I took it apart to clean the vend box and spindles. NOW when you press the button it vends UP 
.. Yes It pushes the cans up.? ? ? ? ? ? ?
Now I really need that book...
John
.. Yes It pushes the cans up.? ? ? ? ? ? ? Now I really need that book...
John
Title: Need help with my first machine...
Post by: on November 30, 2006, 12:59:44 pm
Problem solved,,, Someone put the spindles in all mixed up. Now she works.
Kevin, I still need the book and sold out lights if you have them. Figure up a price and I'll pay by pay-pal.
Plans changed, I won't be in your area this weekend, Just mail them,
John
Kevin, I still need the book and sold out lights if you have them. Figure up a price and I'll pay by pay-pal.
Plans changed, I won't be in your area this weekend, Just mail them,
John
Title: Need help with my first machine...
Post by: Kevin C on November 30, 2006, 02:58:27 pm
John
The sold out lights I have are not working. I had found a website that had them in stock about 6 months ago & I thought it was Happ. When I looked today I could not find them.
Just send the $8 to my paypal account & I will send the manual.
Kevin
The sold out lights I have are not working. I had found a website that had them in stock about 6 months ago & I thought it was Happ. When I looked today I could not find them.
Just send the $8 to my paypal account & I will send the manual.
Kevin
Title: Need help with my first machine...
Post by: Kevin C on December 06, 2006, 09:12:18 pm
John
Burn out already?
Do you need the manaul?
Kevin
Burn out already?
Do you need the manaul?
Kevin
Title: Need help with my first machine...
Post by: on February 13, 2007, 07:11:29 pm
I bought some sold out lights from venders exchange. they have a web site at <www.veii.com>. they cost about 2 bucks each and had a $25 minimum. I might have some left. How many do you need. I also have a box of extra parts for choice vend.