SMC Discussion Areas

Soda Machines, Coolers & Dispensers => Post 60's Machines & Coolers => Topic started by: zadd on September 29, 2006, 09:49:15 pm



Title: v126
Post by: zadd on September 29, 2006, 09:49:15 pm
Does anyone sell the main door latch for vendos( the latch you use to open the main door?) ???


Title: v126
Post by: collecture on September 29, 2006, 10:00:26 pm
I am not aware of anybody selling reproductions of the latch you need, but my manual indicates that the Vendo 63, Vendo 90, Vendo 126 and the Vendo 154 all use the same door latch (the Vendo 56 has a different part number). I'd bet somebody here has an extra.


Title: v126
Post by: zadd on September 29, 2006, 10:09:32 pm
Mine has a lot of slop in it where I can hear air between the outer door and cabinet. Maybe there's a way to tight it up. I can see were the rivit on top has wallered out the hole on the handle ??? I've adjusted the striker plate as far as it will go.


Title: v126
Post by: bubba on September 30, 2006, 05:42:21 am
The striker on the side of the cabinet where the door latches can be adjusted. There is 2 slotted bolts. Just pull the striker closer to the inside of the cabinet and all will be good.