|
Title: Cavalier cs-64 Post by: on December 13, 2002, 01:54:05 pm Ok, the original lable on my machine says 10 cents but it is set to vend at 25.Also every time I put a dime or nickel in it, it returns it.... Can anyone tell me how to change it back to 10 cents? To add insult to injury, the compressor is shot... any suggestions?
Title: Cavalier cs-64 Post by: johnieG on December 13, 2002, 08:11:23 pm Sure at the top corners of the coinmech are two small hook/clips, gently push them up with your thumbs and tip the slug-rejector towards you, tip it enough to clear the clips and then pull it up at an angle. now thats out of the way you see either two small switches with a black & white slide on them or
a single switch-pack with 5 little rocker switches all in a row on the switch with two slides on it (left to right) the first one (black) is 5 cents, the #2 slide(white) is 10 cents, #3(black) is 20 cents and #4(white) is 40 cents, in the UP/ON position you add up the apropriate no. of slides to equal the vend amount ( example...1 + 2 = 15 cents,) so to set it for 10 cents only have #2 UP/ON the other type with five rockers is set up the same way, (left to right) 1=5 cents, 2=10 cents,3=20 cents,4=40 cents, and 5=80 cents. Again just add the total no. of the switches values to set the vend price. as for the compressor does it run ? or is it dead? you might want to gice Eric at Global a call. Title: Cavalier cs-64 Post by: on December 16, 2002, 08:06:53 am Thanks for the instruction... I gave Global a call... $500.00 to rebuild it... More than I wanted to pay, but he appears to be the only game in town..
|