Title: New to this
Post by: David Toulson on August 26, 2006, 08:14:08 am
Hello all! First let me say THANK YOU Jim !!!! Now on to the reason i joined. I recently purchased a CSS-12-96 not in bad shape a few dents and dings cools well overall a good machine I hope. I have a few questions
1) Is this machine refered to as a CS-96
2) Where can I find a manual
3) Best place for parts
4) Should I take the bottle dispence rack apart to clean
Lastly let me say Thanks Again Jim!
1) Is this machine refered to as a CS-96
2) Where can I find a manual
3) Best place for parts
4) Should I take the bottle dispence rack apart to clean
Lastly let me say Thanks Again Jim!
Title: New to this
Post by: Ltransam on August 26, 2006, 09:59:21 am
Welcome To the Group
1.YES
2.Eather someone here may have one OR Funtronic Or the SodaJerks Works .Parts supplyers on this site
3.Same as above
4. Hum ?? Probley can remove it in one piece & use warm soap & water then allow to dry >Some even use Simple Green .
Ltransam
1.YES
2.Eather someone here may have one OR Funtronic Or the SodaJerks Works .Parts supplyers on this site
3.Same as above
4. Hum ?? Probley can remove it in one piece & use warm soap & water then allow to dry >Some even use Simple Green .
Ltransam
Title: New to this
Post by: sodaworks on August 26, 2006, 04:37:31 pm
Hello David,
Welcome aboard!!! Do you plan on restoring the 96? If the bottle stack just needs a good cleaning I would suggest simple green and steam cleaning.
Welcome aboard!!! Do you plan on restoring the 96? If the bottle stack just needs a good cleaning I would suggest simple green and steam cleaning.
Title: New to this
Post by: David Toulson on August 27, 2006, 08:06:23 am
Thanks for the replies. Niice to get some tried on another board didn't get a thing. Yes I do plan on restoring this machine,hopefully back close to orginal that is why I need manual for specs. and paint codes. I've always liked the machines with the doors. Found this one for 100.00 and just couldn't pass up. I will try to get photos to post.
Title: New to this
Post by: David Toulson on August 28, 2006, 11:55:11 am
Thinking of taking dispence mech to car wash to clean should i remove seleniod from rack?
Title: New to this
Post by: sodaworks on August 28, 2006, 09:21:12 pm
Nice score and yes remove the solenoid.
Title: New to this
Post by: BrianB on August 29, 2006, 03:25:18 pm
Welcome aboard david! excellent job on getting that 96.