SMC Discussion Areas

Trouble-Shooting => Vending Mechanisms => Topic started by: johnieG on December 06, 2002, 07:51:40 pm

Title: Free-play switch
Post by: johnieG on December 06, 2002, 07:51:40 pm

Keep getting E-mails asking about how to wire for "Free-Play"
so here is the diagram again :;):

this will work on later machines that use a vend relay too. this is for machines that use the Coinco 115 volt coin-mech and can be used to test the vending mechanism in place of a coin-mech. any questions just ask

Title: Free-play switch
Post by: Jim on December 06, 2002, 09:39:25 pm

Aaahhhh...
Someone else is getting email for a change... :;):

Thanks for posting this and hopefully visitors will just search for things using the Search Tool...