Title: Choice vend ecb(c) 9-72
Post by: Rickplayer on June 26, 2006, 11:26:26 pm
I just bought one of these. It is a Pepsi machine. It gets nice and cold, but does not vend properly. I think it has a bad solenoid. Are there parts availabe, or am I stuck? I guess I could make it so the sodas just rolled down the ramp without vending, but what fun is that?
Title: Choice vend ecb(c) 9-72
Post by: Creighton on June 27, 2006, 12:18:40 am
Welcome to the board!!
Someone should be able to help. A couple of pictures and a description of what happens when a coin is dropped always speeds things up.
Creighton
Someone should be able to help. A couple of pictures and a description of what happens when a coin is dropped always speeds things up.
Creighton
Title: Choice vend ecb(c) 9-72
Post by: Rickplayer on June 27, 2006, 12:28:52 am
When you insert a quarter it just sits in the holder. If I press the coin wires for .50 the solenoids kick and the dispenser motor runs, but when you push a button, the lever does not release.
Title: Choice vend ecb(c) 9-72
Post by: Rickplayer on June 27, 2006, 12:49:32 am
I was reading another post regarding the CREM's. My upper one is not on. I am sure that is not the whole problem, but it is a start.
Title: Choice vend ecb(c) 9-72
Post by: BryanH on June 27, 2006, 11:15:12 am
Rick start by making yourself a free-vend switch. That was you can isolate the problem between the coin mech or the vend system. The coin mech section has a sticky so the instructions are at the top.
Title: Choice vend ecb(c) 9-72
Post by: Rickplayer on June 27, 2006, 11:31:36 am
Thanks Bryan. I printed it out last night. I will try it today.
Jon
Jon