|
Title: Machine getting too cold Post by: USSEnterprise on May 24, 2006, 06:57:42 am My machine is going down to an internal temperature of 28 degrees. Its not loaded, but I would think this to be enough to freeze anything inside. Does it need a new thermostat?
Title: Machine getting too cold Post by: Kevin C on May 24, 2006, 08:26:25 am Hello
Try adjusting the t-stat counter clock wise in short movements to see if you can adjust the temp a little higher. Now the temp will be much colder near the evaporator coil than at the top of the stack. I have found that DR Pepper will start to freeze before pepsi & MD. When in doubt change it out! Kevin |