Title: Vendo ha56e coin mech. problems
Post by: on March 09, 2006, 03:00:44 pm
My dad lost the key to his vendo ha56e coke machine and drilled out the lock.....still couldent get it open. long story short it hasnt been opened in at least 18-20 years..... untill i looked at it and i used some wire and poped open the door. I then cleaned it out and got it up and running, it cools and everything works it seems. Only one problem, you put coins in and it doesnt vend.... any suggestions?
will post pictures later thanx.
will post pictures later thanx.
Title: Vendo ha56e coin mech. problems
Post by: collecture on March 09, 2006, 03:26:09 pm
Hi,
Welcome to the board! It could be any number of problems from the coin mech on down to the vend solenoid. You can make it a free vend very easy - what do you want it to do?
Welcome to the board! It could be any number of problems from the coin mech on down to the vend solenoid. You can make it a free vend very easy - what do you want it to do?
Title: Vendo ha56e coin mech. problems
Post by: Creighton on March 09, 2006, 05:30:28 pm
Welcome to the board. Looking forward to some pics.
Creighton
Creighton
Title: Vendo ha56e coin mech. problems
Post by: sodaworks on March 10, 2006, 05:40:11 pm
It could be dirty. For starters try removing the slug rejector from the coin mech. It is the piece on top thats recieves the coins. Run it through the dish washer and re-install it. 
Title: Vendo ha56e coin mech. problems
Post by: on March 13, 2006, 12:38:24 pm
I still cant seem to get it to work so does anybody know of somewhere to buy a coinco nickle changer? (besides ebay hopefully)
Title: Vendo ha56e coin mech. problems
Post by: collecture on March 13, 2006, 12:46:15 pm
You can't get the machine to vend or can't get the mech to accept coins? Do you need (or want) it to accept coins or would you like it to free vend? Can you attach a picture of the mech?
Title: Vendo ha56e coin mech. problems
Post by: on March 13, 2006, 01:07:18 pm
I figured out the free vend... and also here are some pictures of the machine and the coin mech. i would like it to accept coins and it seems that its just not counting the coins they go through it and go to the places there supposed to go but it doesnt count them.
Title: Vendo ha56e coin mech. problems
Post by: on March 13, 2006, 01:26:00 pm
also if anybody knows about how to set how much the price is that could be my problem here is a picture of the price adjustment swich
Title: Vendo ha56e coin mech. problems
Post by: collecture on March 13, 2006, 01:44:06 pm
Your pics did not register. Use the attach file tool at the bottom of the message post. You can add two per post (size limits apply, so you may need to adjust the size)
Title: Vendo ha56e coin mech. problems
Post by: bubba on March 13, 2006, 02:43:13 pm
Well, right now the vend price is set at 90cents.