Title: V 81 feet pads
Post by: on February 15, 2006, 11:47:20 am
What is the thread size for the V81A feet pads?
Thanks. Brian
Thanks. Brian
Title: V 81 feet pads
Post by: sodaworks on February 15, 2006, 12:30:21 pm
3/8" 16 threads per inch. You can buy a new set from The Soda Jerk Works for about 6 bucks. 
Title: V 81 feet pads
Post by: MCarter on February 15, 2006, 01:15:51 pm
3/8 " buy them at Lowe's
Title: V 81 feet pads
Post by: sodaworks on February 15, 2006, 03:29:25 pm
Does Lowes carry leg levelers?
Title: V 81 feet pads
Post by: MCarter on February 15, 2006, 04:45:19 pm
yep
Title: V 81 feet pads
Post by: sodaworks on February 15, 2006, 04:58:07 pm
Thanks, I'll have to check them out. 
Title: V 81 feet pads
Post by: on February 16, 2006, 12:49:52 pm
Thanks. I thought that's what they were.
I've seen them at Home Depot too.
Brian.
I've seen them at Home Depot too.
Brian.
Title: V 81 feet pads
Post by: coke_and_stuff on February 16, 2006, 06:43:24 pm
where at in Home depot? i work there at night and havent seen these.
Joey
Joey
Title: V 81 feet pads
Post by: dr galaga on February 16, 2006, 08:34:02 pm
| Quote (sodaworks @ Feb. 15 2006,12:30) |
| 3/8" 16 threads per inch. |
For future reference are most Vendos this size (icluding slant-shelf square tops)?
Title: V 81 feet pads
Post by: MoonDawg on February 16, 2006, 09:45:04 pm
Yes...........and even regular bolts will work
Title: V 81 feet pads
Post by: sodaworks on February 16, 2006, 10:24:15 pm
Just a little tip, when I paint a machine I use bolts that are about 5" long to get it up off the ground. 
Title: V 81 feet pads
Post by: on February 17, 2006, 05:31:21 pm
The ones I saw were in the caster, slider section. They had various sizes but didn't have the thread size noted on pkg.
Brian
Brian
Title: V 81 feet pads
Post by: collecture on February 19, 2006, 12:34:43 pm
I've also seen the levelers at Ace Hardware stores
Title: V 81 feet pads
Post by: collecture on February 23, 2006, 12:56:37 pm
FYI,
I was just doing a little clutter clean about the house. We bought the newer front loading Washer / Dryer set from Sears last year and I came across the bag of extra parts that came with it. I noticed there were four little feet for the pedestal part. I thought they looked like a familiar size and sure enough. They are the same 3/8-16 size as used on the machines. What makes these different from the ones I have seen at the home improvement stores though is they have a rubber non-slide foot, so if your machine is on a wood floor or something these would be great. I did not look up a price or anything, but I'm sure you can find them at any appliance parts site or store. It is a Kenmore appliance and, according to my repair parts list, the factory part number is 8537852 and it is labeled 'Foot Assembly' - #7 in the illustration.
I was just doing a little clutter clean about the house. We bought the newer front loading Washer / Dryer set from Sears last year and I came across the bag of extra parts that came with it. I noticed there were four little feet for the pedestal part. I thought they looked like a familiar size and sure enough. They are the same 3/8-16 size as used on the machines. What makes these different from the ones I have seen at the home improvement stores though is they have a rubber non-slide foot, so if your machine is on a wood floor or something these would be great. I did not look up a price or anything, but I'm sure you can find them at any appliance parts site or store. It is a Kenmore appliance and, according to my repair parts list, the factory part number is 8537852 and it is labeled 'Foot Assembly' - #7 in the illustration.