Title: 600 series
Post by: dprat1 on January 15, 2006, 06:36:56 pm
In process of restoring 600 series dual slug rejector for my C-51. There is a piece that appears to be bent and should not be? I have circled the piece in question. The protruding lever is slightly bent down at an angle. Not sure of the function but seems to me it should be pointing straight out at 90 degrees??
Thanks,
doug
Thanks,
doug
Title: 600 series
Post by: MCarter on January 15, 2006, 07:01:59 pm
That piece is there to let the Coin Mech. know if there is soda in the machine. It trips it when the machine is sold out. Hope this helps.
Title: 600 series
Post by: dprat1 on January 15, 2006, 07:53:45 pm
Matt,
I meant to post under "coin mechaniams". Think I must be in shock and depressed with the ball game today
Oh well...they didn't deserve to win that one. I ran a coin through while holding the lever in, as if out of product, and the coin went straight through to coin return. So must be operating properly....will leave as is I guess. Thanks for the information.
doug
I meant to post under "coin mechaniams". Think I must be in shock and depressed with the ball game today
Oh well...they didn't deserve to win that one. I ran a coin through while holding the lever in, as if out of product, and the coin went straight through to coin return. So must be operating properly....will leave as is I guess. Thanks for the information.doug